232 D+ - Security Camera AXIS - Free user manual and instructions
Find the device manual for free 232 D+ AXIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (Dome) |
| Brand | Axis |
| Model | 232 D+ |
| Dimensions | Approx. 150 mm (diameter) x 100 mm (height) |
| Weight | Approx. 0.5 kg |
| Power Supply | Power over Ethernet (PoE) IEEE 802.3af, 8-28 V DC or 24 V AC |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Resolution | 2 Megapixel (1920x1080) at 30 fps |
| Lens | Varifocal 2.8-10 mm, F1.6 |
| Field of View | Horizontal: 90°-30°, Vertical: 65°-22° |
| Day/Night | Yes, with IR-cut filter |
| Infrared Range | Up to 15 m (50 ft) |
| Compression | H.264, Motion JPEG |
| Interface | 10/100 Base-T RJ-45, Terminal block for I/O |
| Ingress Protection | IP66 (outdoor use) |
| Operating Temperature | -30°C to 50°C (-22°F to 122°F) |
| Main Features | Motion detection, tampering alarm, edge recording, Power over Ethernet |
| Maintenance | Clean dome and housing with a soft, dry cloth; avoid solvents |
| Safety | Use only with certified PoE switches; ensure proper grounding |
| Spare Parts | Replacement lens, IR LED board, gasket kit (available from Axis) |
| Warranty | 3 years limited |
Frequently Asked Questions - 232 D+ AXIS
How do I reset the Axis 232 D+ to factory default?
Locate the control button on the camera. Press and hold the button for 15-20 seconds until the status LED flashes amber. Release the button; the camera will reboot with factory settings.
What power supply does the 232 D+ require?
The camera supports Power over Ethernet (PoE) IEEE 802.3af. Alternatively, it can be powered via 8-28 V DC or 24 V AC using the terminal block.
How can I access the camera's web interface?
Connect the camera to your network and use AXIS IP Utility or a web browser to find its IP address. Enter the IP address in your browser (default username: root, password: root, but change it immediately).
What is the maximum resolution and frame rate?
The Axis 232 D+ can stream 2 Megapixel (1920x1080) video at up to 30 frames per second in H.264 or Motion JPEG.
Does the camera have night vision?
Yes, it features built-in IR LEDs with a range of up to 15 meters (50 feet) for clear imaging in complete darkness.
Is the camera suitable for outdoor use?
Yes, the 232 D+ has an IP66 rating, meaning it is dust-tight and protected against powerful water jets, making it ideal for outdoor installations.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or a mild lens cleaner. Gently wipe the dome in a circular motion. Do not use abrasive cleaners or solvents.
Can I record video without a network video recorder?
Yes, the camera supports onboard edge storage via a microSD card (not included). Insert the card into the slot and configure recording in the web interface.
What is the warranty period for the Axis 232 D+?
Axis offers a limited 3-year warranty from the date of purchase. Check with your distributor for specific terms.
How do I update the camera firmware?
Download the latest firmware from the Axis support website. In the camera's web interface, go to 'System Options' > 'Firmware Upgrade', select the file, and follow the prompts. Do not power off during the update.
User questions about 232 D+ AXIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual 232 D+ - AXIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 232 D+ by AXIS.