FD-364N - Router Phicomm - Free user manual and instructions
Find the device manual for free FD-364N Phicomm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Phicomm |
| Model | FD-364N |
| Wireless Standards | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Ethernet Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Antenna Type | External, fixed |
| Number of Antennas | 2 |
| Dimensions (W x D x H) | 150 x 100 x 30 mm |
| Weight | 200 g |
| Power Supply | 12V DC, 1A |
| Security Features | WEP, WPA/WPA2, MAC filtering, SPI firewall |
| VPN Support | PPTP, L2TP, IPsec pass-through |
| DHCP Server | Yes |
| NAT | Yes |
| Management Interface | Web-based (HTTP/HTTPS) |
| Default IP Address | 192.168.1.1 |
| Default Username/Password | admin/admin |
| Reset Button | Yes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Frequently Asked Questions - FD-364N Phicomm
How do I reset the Phicomm FD-364N to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds using a paperclip. The device will reboot and all settings will be restored to factory defaults.
What is the default IP address for the FD-364N?
The default IP address is 192.168.1.1. You can access the web interface by entering this IP in your browser.
How do I change the Wi-Fi password on the FD-364N?
Log in to the web interface (192.168.1.1), go to Wireless Settings, and change the pre-shared key or passphrase. Save the settings and reboot the router if required.
Does the FD-364N support VPN passthrough?
Yes, it supports PPTP and L2TP passthrough. However, native VPN server functionality may not be available.
What should I do if I forget the router password?
You can perform a factory reset by holding the reset button for 10 seconds. After that, use the default credentials (admin/admin) to log in.
How can I improve the wireless range of the FD-364N?
Place the router in a central location away from metal objects and electronic interference. Ensure antennas are properly positioned. You can also try changing the wireless channel to less congested one.
Is the FD-364N compatible with 802.11ac devices?
No, the FD-364N only supports 802.11b/g/n on the 2.4 GHz band. It is not compatible with 5 GHz or 802.11ac standards.
How do I update the firmware on the FD-364N?
Download the latest firmware from the Phicomm support site. Log in to the web interface, go to System Tools > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What type of Ethernet cable should I use with the FD-364N?
Use standard Cat5e or Cat6 Ethernet cables for best performance. The router ports are 10/100 Mbps, so cables rated for gigabit are fine but not required.
Can I use the FD-364N as a wireless repeater?
The FD-364N may not have a dedicated repeater mode. However, you can configure it as a wireless bridge or access point if supported by the firmware. Check the advanced wireless settings.
User questions about FD-364N Phicomm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual FD-364N - Phicomm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FD-364N by Phicomm.