ED-X22EF - Video projector HITACHI - Free user manual and instructions
Find the device manual for free ED-X22EF HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Hitachi |
| Model | ED-X22EF |
| Display Technology | LCD (3LCD) |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 2200 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Lamp Type | UHP 200W |
| Lamp Life (Normal Mode) | 3000 hours |
| Lamp Life (Eco Mode) | 4000 hours |
| Projection Size | 30 - 300 inches |
| Throw Ratio | 1.5 - 1.8:1 |
| Input Ports | VGA, S-Video, Composite, Audio |
| Weight | 3.1 kg (6.8 lbs) |
| Dimensions (W x D x H) | 306 x 249 x 86 mm |
| Power Consumption | 310W (Standby: <5W) |
| Noise Level | 35 dB (Normal), 29 dB (Eco) |
| Maintenance | Air filter cleaning every 500 hours; lamp replacement |
| Safety Features | Automatic shutdown after 30 min idle; overheat protection |
| Spare Parts Availability | Lamp, air filter, remote control available from Hitachi service centers |
| Reparability | Lamp, filter, and fan are user-accessible; other repairs require technician |
Frequently Asked Questions - ED-X22EF HITACHI
What is the native resolution of the Hitachi ED-X22EF?
The native resolution is XGA (1024 x 768), suitable for presentations and standard video.
How do I clean the air filter?
Turn off and unplug the projector. Locate the filter cover (usually on the side), remove the filter, and vacuum it gently or wash with mild soap and water. Dry completely before reinstalling. Clean every 500 hours.
What lamp does the ED-X22EF use and how do I replace it?
It uses a 200W UHP lamp. To replace, turn off and unplug, allow to cool, open the lamp compartment, release the lamp module, and insert the new one. Dispose of old lamp properly.
Can I connect a laptop to this projector?
Yes, use a VGA cable from your laptop's VGA output to the projector's VGA input. You may need an adapter for modern laptops. Also, ensure your laptop is set to extend or duplicate display.
Why is my projector overheating?
Possible causes: blocked air vents, dirty filter, or ambient temperature too high. Clean the filter, ensure vents have clearance, and reduce room temperature if needed.
How do I adjust the keystone correction?
Press the Keystone button on the remote or control panel, then use the up/down arrows to correct trapezoidal distortion.
What is the recommended throw distance for a 100-inch screen?
With a throw ratio of 1.5-1.8:1, you need a distance of approximately 3.0 to 3.6 meters (10-12 feet) from the screen.
Does the projector support 3D?
No, the Hitachi ED-X22EF is a standard 2D projector and does not have 3D capability.
How can I reset the lamp timer?
After replacing the lamp, plug in the projector and press the Menu button, navigate to 'Lamp Timer Reset', select 'Yes' and confirm.
Why is there no image?
Check that the projector is powered on and the lens cap is removed. Verify the source is selected correctly (VGA, S-Video, etc.). Also, ensure the connected device is outputting a signal.
User questions about ED-X22EF HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual ED-X22EF - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ED-X22EF by HITACHI.