NS831D - Computer accessory Newstar - Free user manual and instructions
Find the device manual for free NS831D Newstar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monitor Arm / Stand |
| Brand | Newstar |
| Model | NS831D |
| Material | Aluminum alloy, steel |
| Color | Black |
| Max VESA Size | 100x100 mm |
| Max Monitor Weight | 8 kg (17.6 lbs) |
| Arm Length | 480 mm (18.9 in) |
| Tilt Range | -15° to +15° |
| Swivel Range | ±90° |
| Rotation (Landscape/Portrait) | 360° |
| Cable Management | Integrated channel |
| Mounting Options | Clamp (up to 60 mm) or Grommet |
| Dimensions (Arm) | 480 x 120 x 50 mm |
| Weight (Arm) | 2.5 kg (5.5 lbs) |
| Recommended Screen Size | 13" to 27" |
| Warranty | 2 years |
Frequently Asked Questions - NS831D Newstar
How do I install the Newstar NS831D monitor arm?
First, attach the VESA plate to your monitor. Then, clamp the arm to your desk edge or use the grommet mount. Adjust the arm tension with the included hex key. Refer to the manual for detailed steps.
What is the maximum monitor size and weight for this arm?
The arm supports monitors up to 27 inches and a maximum weight of 8 kg (17.6 lbs). Always check your monitor's weight and VESA compatibility.
Is the NS831D compatible with curved monitors?
Yes, it can hold curved monitors as long as they meet the weight and VESA requirements. The flat VESA plate attaches securely.
Can I use this arm with a monitor that has a non-standard VESA pattern?
Only monitors with 100x100 mm VESA pattern are supported. Adapters are not included for other patterns.
How do I adjust the arm tension for my monitor?
Use the provided hex key to tighten or loosen the tension screws at the joints. Start with medium tension and adjust until the arm stays in place without drooping.
Does the arm include cable management?
Yes, the arm has an integrated cable channel to route cables neatly along the arm. Simply snap your cables into the channel.
How do I clean the monitor arm?
Wipe with a soft, dry cloth. Avoid harsh chemicals; use a mild detergent if needed. Do not spray liquids directly on the arm.
What is the warranty coverage for the NS831D?
Newstar offers a 2-year warranty against manufacturing defects. Contact customer support for claims.
Can I purchase spare parts for the arm?
Spare parts like VESA plates and clamps are available through Newstar's website or authorized dealers. Contact support for specific requests.
What tools are needed for installation?
A Phillips screwdriver and the included hex key are required. No power tools are recommended to avoid over-tightening.
User questions about NS831D Newstar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer accessory in PDF format for free! Find your manual NS831D - Newstar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NS831D by Newstar.