DS-K1T981MF - Uncategorized Hikvision - Free user manual and instructions
Find the device manual for free DS-K1T981MF Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Face Recognition Access Control Terminal |
| Model | DS-K1T981MF |
| Brand | Hikvision |
| Display | 7-inch Touch Screen |
| Face Recognition Capacity | Up to 3,000 faces |
| Card Reading | Mifare (13.56 MHz) |
| User Capacity | Up to 5,000 users |
| Event Log | Up to 100,000 events |
| Communication | TCP/IP, RS-485, Wiegand |
| Power Supply | DC 12V / PoE (802.3af) |
| Power Consumption | ≤ 15 W |
| Operating Temperature | -10°C to 50°C |
| Protection Level | IP65 |
| Dimensions (W x H x D) | 200 mm × 120 mm × 50 mm |
| Weight | Approx. 0.6 kg |
| Mounting | Wall-mounted |
| Maintenance | Clean the lens with a soft dry cloth |
| Security Features | Anti-spoofing, Tamper alarm |
| Spare Parts | Power adapter, mounting bracket, screw kit |
| Repairability | Contact authorized service center for repairs |
Frequently Asked Questions - DS-K1T981MF Hikvision
How do I reset the device to factory settings?
To reset the DS-K1T981MF, press and hold the reset button (usually located on the back) for 10 seconds until the device reboots. Alternatively, you can perform a factory reset via the web interface under Settings > System > Maintenance.
How to add new users?
You can add users via the local interface: go to User Management > Add User, and enter the user's name and ID. Then register the face by facing the camera and following the prompts. Users can also be added remotely through the Hikvision software.
What should I do if the device does not recognize my face?
Ensure proper lighting and distance (30-80 cm). Clean the camera lens. Verify the face has been enrolled correctly. If problems persist, adjust the recognition threshold in the settings or contact technical support.
Can I connect the terminal to a door lock?
Yes, the device has a relay output (NO/NC) that can be wired to an electric lock. Refer to the manual for wiring diagrams and maximum load ratings.
How to update the firmware?
Download the latest firmware from the official Hikvision website. Access the web interface, go to System > Upgrade, select the firmware file, and start the upgrade. Do not power off during the process.
What is the default IP address?
The default IP address is 192.168.1.64. If DHCP is enabled, check your router for the assigned IP. You can reset the device to restore default network settings.
How to export attendance logs?
Access the web interface, go to Attendance > Report, select the date range, and click Export. The logs can be exported as Excel or text files.
Does the device support PoE?
Yes, the DS-K1T981MF supports Power over Ethernet (PoE) IEEE 802.3af, simplifying installation as only one network cable is required.
How to clean the device?
Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid abrasive cleaners and direct moisture on the lens. Dry thoroughly after cleaning.
What is the warranty period?
Hikvision typically offers a 2-year warranty for access control terminals. Contact your dealer for specific warranty terms and conditions.
User questions about DS-K1T981MF Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DS-K1T981MF - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1T981MF by Hikvision.