CLR-50-50-R-P-A - Uncategorized Festo - Free user manual and instructions
Find the device manual for free CLR-50-50-R-P-A Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact Pneumatic Cylinder with Position Sensing |
| Model | CLR-50-50-R-P-A |
| Manufacturer | Festo |
| Bore Diameter | 50 mm |
| Stroke Length | 50 mm |
| Operating Principle | Double-acting |
| Operating Pressure | 1 to 10 bar |
| Ambient Temperature | -20 °C to 80 °C |
| Cushioning | Adjustable pneumatic cushioning at both ends |
| Position Sensing | Integrated reed switch (R variant) |
| Medium | Compressed air filtered, lubricated or unlubricated |
| Port Size | G1/8 (according to Festo standard) |
| Piston Rod Thread | External thread (P variant) |
| Material (Piston Rod) | Stainless steel 1.4301 |
| Material (Profile/End Caps) | Aluminum anodized / Die-cast aluminum |
| Weight (approx.) | 1.2 kg |
| Protection Class | IP40 |
| Maintenance | No scheduled maintenance; replace seals if leakage occurs |
| Safety | Do not exceed maximum pressure; use soft-start for initial pressurization |
| Compliance | ISO 15552 (meets international standard) |
Frequently Asked Questions - CLR-50-50-R-P-A Festo
What is the operating pressure range for the Festo CLR-50-50-R-P-A?
The operating pressure range is 1 to 10 bar. Always ensure the supply pressure stays within this limit to avoid damage.
Can the CLR-50-50-R-P-A be used with non-lubricated air?
Yes, the cylinder is designed for filtered, lubricated or unlubricated compressed air. However, using filtered air extends service life.
What type of position sensor does the 'R' variant indicate?
The 'R' denotes integrated reed switch (magnetic sensor) for detecting piston position. Compatible sensors include Festo SME/SMT series.
How do I adjust the cushioning on this cylinder?
The cylinder has adjustable pneumatic cushioning at both ends. Use the adjustment screws on the end caps with a hex key to reduce impact at stroke ends.
What is the maximum ambient temperature for the CLR-50-50-R-P-A?
The maximum ambient temperature is 80 °C. For higher temperatures, consult Festo for alternative seals.
Is the piston rod threaded?
Yes, the 'P' variant indicates an external thread on the piston rod. This allows direct mounting of attachments or connectors.
How often should I replace seals?
Seals do not have a fixed replacement interval. Replace them only if leakage occurs. Use Festo original seal kits for reliability.
What is the approximate weight of the CLR-50-50-R-P-A?
The weight is approximately 1.2 kg. Exact weight may vary slightly; refer to the product label for the precise value.
Can I use this cylinder in a food processing environment?
Standard materials are not food-grade. For food applications, consider Festo's clean-design variants with special materials and lubrication.
What is the port size and thread type?
The port size is G1/8 (BSPP). Use appropriate fittings with sealing tape or O-rings to prevent leaks.
User questions about CLR-50-50-R-P-A Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CLR-50-50-R-P-A - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLR-50-50-R-P-A by Festo.