Victoria MP3009 - Lighting Kuzco - Free user manual and instructions

Product Type	Pendant Light
Brand	Kuzco
Model	Victoria MP3009
Category	Lighting
Material	Metal and Glass
Color	Matte Black / Clear Glass
Finish	Painted
Dimensions	Height: 30 in (76 cm), Diameter: 20 in (51 cm)
Weight	10 lbs (4.5 kg)
Light Source	LED compatible (bulb not included)
Wattage	Max 60W
Voltage	120V AC
Dimmable	Yes (when using dimmable bulbs)
Mounting Type	Ceiling mount
Installation	Hardwired
Safety Rating	UL Listed / ETL Listed
Included Components	Mounting hardware, installation instructions
Warranty	1 year limited
Maintenance	Wipe with dry cloth, do not use harsh chemicals
Adjustable Height	Yes, adjustable chain or rod
Number of Lights	1
Bulb Base	E26 (standard)

Frequently Asked Questions - Victoria MP3009 Kuzco

How do I install the Victoria MP3009 pendant light?

Installation should be performed by a qualified electrician. Turn off power at the circuit breaker. Connect the fixture wires to house wires (black to live, white to neutral, green/bare to ground). Secure the mounting bracket and attach the fixture. Ensure all connections are tight.

What type of bulb does this light require?

The Victoria MP3009 uses a standard E26 base bulb. It is compatible with LED, incandescent, or CFL bulbs up to 60W. Bulb is not included.

Is this light dimmable?

Yes, the fixture is dimmable when used with a compatible dimmable bulb and a standard dimmer switch. Ensure the bulb is marked as dimmable.

How do I clean and maintain the fixture?

Clean with a soft, dry cloth. Do not use abrasive cleaners or harsh chemicals. For glass parts, a mild glass cleaner on a cloth can be used. Always turn off power before cleaning.

What is the weight of the fixture?

The fixture weighs approximately 10 lbs (4.5 kg). Ensure your ceiling junction box can support this weight.

Can this light be used outdoors?

No, the Victoria MP3009 is designed for indoor use only. It is not rated for outdoor or damp locations.

What is the warranty period?

Kuzco provides a 1-year limited warranty against defects in materials and workmanship. Contact Kuzco customer service for warranty claims.

Are replacement parts available?

Replacement parts such as glass shades and mounting hardware can be ordered through Kuzco's customer service. Check the model number MP3009 when ordering.

Can the height be adjusted?

Yes, the height is adjustable via the included adjustable chain or rod. You can customize the hanging length during installation.

Is this fixture compatible with sloped ceilings?

The Victoria MP3009 is designed for flat ceilings. For sloped ceilings, an adapter kit may be required. Consult a qualified electrician.

USER MANUAL Victoria MP3009 Kuzco

Ceiling LED pendants.

Please Note:

• All Kuzco LED fixtures come with pre-wired LED module(s).
• Unless instructed to do so, please do not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage.

• For dimming, an ELV (Electronic Low Voltage) dimmer is required.

• Remove the fixture from its original packaging. Remove the canopy mounting bar from within the canopy by removing the decorative nuts. Mount the hanging bar (with canopy screws facing downward) to the junction box make sure all screws screw into wood not just drywall.

• Before you mount the canopy to the mounting bar please select the desired lengths you wish the pendants to hang. To shorten the cable just push the cable up into the canopy nipple (2a). To lengthen the wire push up the tiny nipple (2a) where the wire comes through pull the wire to your desired length then release the nipple and the wire will stay in place. Once you have adjusted all the wires to the desired lengths, move all the wire grips down each the wire from inside the canopy until the grip hold the wire closest to where the wire enters into the canopy.
• You are now ready to mount the canopy to the mounting cross bar first connect all wires correctly L live wire (white to white) N neutral wire (black to black) and G ground (green to green) with provided marrets from the hardware package 3a). Align the four screw hanging downward from the crossbar to the four holes inside the canopy. Push the canopy up towards the ceiling so the screws point through the holes in the canopy. You can then screw on the four decorative nuts (3b) onto the four screws pointing through the canopy to securely install the canopy to the mounting bar.
• LED Engines are built in. Push the glass (4a) up to the LED engines (4b) and thread turning clockwise.
• You have now completed the installation of your fixture, enjoy.

START FROM HERE

• Make sure power is completely off at the fuse box.
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in clear area.
• Wear gloves at all times during this installation.
• Read instructions carefully before you start assembly.
• Keep this instruction sheet for future reference. Technical Support: 1-877-452-6858