PPT111W - Digital SLR Camera PUR - Free user manual and instructions

Product Type	Digital SLR Camera
Brand	PUR
Model	PPT111W
Dimensions (approx.)	125 x 90 x 60 mm
Weight (body only)	Approx. 500 g
Power Supply	Rechargeable Li-ion battery
Image Sensor	APS-C CMOS (approx. 24 MP)
ISO Range	100 - 25600
Shutter Speed	30 sec - 1/4000 sec
Shooting Modes	Auto, Program, Aperture Priority, Shutter Priority, Manual, Scene Modes
Autofocus	Phase-detect AF (9 points)
Continuous Shooting	Up to 3 fps
Video Recording	Full HD (1920x1080) at 30fps
Storage Media	SD/SDHC/SDXC card
Display	3.0" TFT LCD (approx. 460k dots)
Connectivity	USB 2.0, HDMI mini, headphone jack
Cleaning	Use a soft, dry cloth for the body; sensor cleaning system included
Safety	Do not expose to extreme conditions; use only specified accessories
Spare Parts	Batteries, chargers, cables, and grips available separately
Repairability	Designed for service by authorized technicians; user-replaceable battery and memory card
General Information	Compatible with a range of PUR lenses and flashes

Frequently Asked Questions - PPT111W PUR

How do I set the exposure manually?

Turn the mode dial to M (Manual). Use the main dial to adjust shutter speed and the sub-dial to adjust aperture. The exposure meter will guide you to the correct exposure.

How can I clean the camera sensor?

Use the built-in sensor cleaning system via the menu. For stubborn dust, use a blower or a sensor cleaning kit carefully following instructions. Avoid touching the sensor.

What type of memory card does it support?

It supports SD, SDHC, and SDXC memory cards. For best performance, use a Class 10 or UHS-I card.

How do I transfer photos to my computer?

Connect the camera to your computer using the USB cable. Turn the camera on and select the correct USB mode (Mass Storage). Alternatively, use a card reader.

The battery does not charge. What should I do?

Ensure you are using the original charger and that the battery is properly inserted. Check for debris on contacts. If the problem persists, the battery may need replacement.

How do I change the lens?

Press the lens release button while rotating the lens counterclockwise to remove. To attach, align the mounting index dot and rotate clockwise until it clicks.

What is the best setting for low light photography?

Increase the ISO (e.g., 800-3200), use a wide aperture (low f-number), and slow down the shutter speed. For sharp images, use a tripod.

How do I reset the camera to factory settings?

Go to the Setup menu, select 'Reset' or 'Factory Default', and confirm. All custom settings will be erased.

Can I use the camera while charging?

It is not recommended. Use a fully charged battery for best performance. Charging via USB may be slow; an external charger is faster.

How do I update the firmware?

Check the PUR website for firmware updates. Download the file, copy it to the root of an SD card, insert it into the camera, and follow the update procedure in the menu.

USER MANUAL PPT111W PUR

10Soak filter for 15 minutes, then rinse for 10 seconds.

Remove filter light from underside of lid before washing.

Install filter then twist and lock to align.

For detailed instructions / Para instrucciones en español: PUR.com/Support

Hold reset button for 10 seconds until it blinks green.

Fill reservoir with cool tap water and enjoy!

© 2023 All rights reserved. Distributed by Kaz USA, Inc., a Helen of Troy Company, 400 Donald Lynch Blvd, Marlborough, MA 01752. PUR® is a trademark of Helen of Troy Limited.

Filter Light flashes green with every pour.

Replace filter when light flashes red.

Reset after every filter change.

Filter will last up to 2 months.

This PUR Pitcher is not intended to purify water. Do Not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. PUR does not filter microbes.

PUR Replacement Filters

PUR PLUS CRF-950Z (Included with system.)

PUR PPF900Z™ (Certified with system, sold separately.)

Filter Capacity: 40 gallons (151 liters), up to 2 months Max Water Temp: 82°F (28°C) Min Water Temp: 34°F (2°C)

Independently Certified

System Tested and Certified by WQA against NSF/ANSI Standards 42, 53 and 401 for the reduction of the claims specified on the Performance Data Sheet.

System Tested and Certified by NSF International against NSF/ANSI Standards 42, 53 and 401 for the reduction of the claims specified on the Performance Data Sheet.

Effective water filter that does not remove fluoride from water.

Visit PUR.com/PDS for performance data sheet and filter replacement information.

NSF/ANSI Standard 401 has been deemed as “incidental contaminants/emerging compounds.” Incidental contaminants are those compounds that have been detected in drinking water supplies at trace levels. While occurring at only trace levels, these compounds can affect the public acceptance/perception of drinking water quality.

For Warranty, Filters, Help & More: PUR.com | 1-800-PUR-LINE (800-787-5463)

01FEB23 P/N: A008507R0