RS 27 - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free RS 27 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | PCE Instruments |
| Model | RS 27 |
| Category | Measurement |
| Dimensions (approx.) | 150 x 70 x 30 mm |
| Weight (approx.) | 200 g |
| Power Supply | 9V battery (PP3 type) |
| Display | LCD, 3 1/2 digits |
| DC Voltage Range | 200 mV – 1000 V |
| AC Voltage Range | 200 mV – 750 V |
| DC Current Range | 200 µA – 10 A |
| Resistance Range | 200 Ω – 20 MΩ |
| Additional Functions | Continuity test, diode test, transistor hFE test |
| Safety Rating | CAT III 600V, CAT II 1000V |
| Accessories Included | Test leads, 9V battery, user manual |
| Maintenance | Clean with dry cloth; replace battery when low battery indicator appears |
| Spare Parts | Test leads, battery cover, fuse (if applicable) |
| Repairability | Designed for full repair; contact PCE Instruments for service |
Frequently Asked Questions - RS 27 PCE Instruments
How do I measure DC voltage with the RS 27?
Turn the rotary dial to the DCV position. Connect the black test lead to the COM terminal and the red lead to the VΩmA terminal. Touch the probes to the circuit and read the display.
What is the maximum voltage the RS 27 can measure?
The RS 27 can measure up to 1000 V DC and 750 V AC. Do not exceed these limits.
How do I check continuity with this multimeter?
Set the rotary dial to the continuity symbol (usually a diode or sound wave). Connect the probes as for resistance measurement. If continuity exists, the meter will beep.
What battery does the RS 27 use?
It uses a standard 9V PP3 battery. Replace it when the low battery indicator appears on the display.
Can I measure current above 10 A?
No, the maximum current is 10 A for up to 10 seconds. For higher currents, use a clamp meter.
How do I clean and maintain the RS 27?
Clean the meter and test leads with a dry, lint-free cloth. Do not use solvents. Store in a dry place.
What safety precautions should I take?
Always choose the correct range. Do not measure voltage above the rated category. Use insulated probes. Remove test leads before changing battery.
How do I test a diode with the RS 27?
Turn the dial to the diode symbol. Connect the red lead to the anode and black to the cathode. A good diode shows a forward voltage drop (0.5-0.8V for silicon).
Why does the display show '1'?
A '1' on the leftmost digit indicates an overrange condition. Switch to a higher range or check the circuit connection.
Where can I find the user manual?
The user manual can be downloaded for free from notice-facile.com in PDF format.
User questions about RS 27 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual RS 27 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RS 27 by PCE Instruments.