GGSPA200W - Air purifier Sôlt - Free user manual and instructions

Product Type	Air Purifier
Brand	Sôlt
Model	GGSPA200W
Dimensions (H x W x D)	400 x 200 x 200 mm
Weight	2.5 kg
Power Supply	AC 220-240V, 50Hz
Power Consumption	30 W
Noise Level	≤ 45 dB(A)
Coverage Area	Up to 20 m²
CADR (Clean Air Delivery Rate)	150 m³/h
Filtration Stages	Pre-filter, HEPA H13, Activated Carbon
Fan Speeds	3 speeds + Auto mode
Timer Function	2/4/8 hours
Air Quality Indicator	PM2.5 sensor with color display
Filter Replacement Indicator	Yes
Filter Life	Approx. 6 months (HEPA), 3 months (Carbon)
Maintenance	Clean pre-filter every 2 weeks; replace filters as indicated
Safety Features	Overheat protection, auto shut-off when front cover removed
Spare Parts Availability	Replacement filters available online
Warranty	2 years

Frequently Asked Questions - GGSPA200W Sôlt

How often should I replace the HEPA filter?

The HEPA filter should be replaced approximately every 6 months, or when the filter replacement indicator lights up.

Can I wash the HEPA filter?

No, the HEPA filter is not washable. Only the pre-filter can be cleaned with a vacuum or water. For the HEPA, replace it as needed.

What does the air quality indicator mean?

The indicator uses colors: green (good), yellow (moderate), red (poor). It reflects real-time PM2.5 levels.

How do I reset the filter replacement timer?

After replacing the filter, press and hold the filter reset button for 3 seconds until the indicator turns off.

Is the purifier safe to leave on overnight?

Yes, it has a sleep mode with low noise and dimmed lights. The auto shut-off safety feature provides added protection.

What is the recommended room size?

The GGSPA200W is best for rooms up to 20 m². For larger spaces, consider multiple units.

Does it produce ozone?

No, this purifier uses mechanical filtration (HEPA and carbon) and does not generate ozone.

Can I use the purifier without the carbon filter?

It is not recommended as the carbon filter removes odors and VOCs. The unit may not perform optimally without it.

How do I clean the pre-filter?

Remove the front cover, take out the pre-filter, and vacuum it or rinse with water. Let it dry completely before reinstalling.

Where can I buy replacement filters?

Replacement filters are available on the Sôlt website or through authorized retailers. Use model GGSPA200W for the correct part.

USER MANUAL GGSPA200W Sôlt

Tips for Using & Operating Your Air Purifier

Model: GGSPA200W

Exterior view of a modern SOLT air purifier with vertical slats and a blue LED indicator (no text or symbols on the device itself)

Air Purifier with Air Purifier Getting Started...

Your Air Purifier Operating Instructions

1 Air quality LED
2 Split button
3 Control panel/ display screen
4 Air outlet grille
5 PM2.5 sensor
6 Back cover

7 Adapter
8 Filter assembly
9 Air inlet grille

Also included:

Power adapter

	On/standby button
	Auto mode button: Adjusts the wind speed automatically based on air quality
	Light button: Adjust button light and turn on/off ambient lighting
	Timer button: 2hr, 4hr, 6hr
	Speed button: Slow, medium, high
	Sleep mode button / LED
	HEPA filter replacement LED
	Speed displays LED