Reference RS 2000.6 - Pregnant INFINITY - Free user manual and instructions
Find the device manual for free Reference RS 2000.6 INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Brand | Infinity |
| Model | Reference RS 2000.6 |
| Woofer Size | 6.5 inches |
| Tweeter Size | 1 inch |
| Number of Drivers | 2 |
| Impedance | 8 ohms |
| Sensitivity | 89 dB (2.83V/1m) |
| Frequency Response | 45 Hz - 20 kHz |
| Power Handling (RMS) | 150 W |
| Power Handling (Peak) | 300 W |
| Recommended Amplifier Power | 10 - 200 W |
| Crossover Frequency | 2.5 kHz |
| Enclosure Type | Bass reflex (ported) |
| Dimensions (H x W x D) | 400 x 250 x 300 mm |
| Weight | 12 kg each |
| Input Type | Binding posts |
| Recommended Placement | Bookshelf or stands, away from walls |
| Cleaning | Wipe with dry, soft cloth |
| Safety | Keep away from moisture; do not overload |
| Spare Parts / Repairability | Drivers and crossovers replaceable by qualified technician |
| Warranty | Refer to manufacturer |
Frequently Asked Questions - Reference RS 2000.6 INFINITY
What is the power handling of the Infinity Reference RS 2000.6?
The speaker handles 150 W RMS and 300 W peak. It is recommended to use an amplifier with 10-200 W per channel.
What is the impedance of the RS 2000.6?
The nominal impedance is 8 ohms.
How should I position the speakers for best sound?
Place them on sturdy bookshelves or stands at ear level, at least 30 cm from walls to avoid bass boom. Angle them slightly toward the listening position.
Can I use these speakers with a subwoofer?
Yes, they work well with a subwoofer. Set your receiver's crossover to 80 Hz for a seamless blend.
How do I clean the speakers?
Use a soft, dry cloth to wipe the cabinet and grille. Do not use any solvents or wet cloths.
What type of speaker wire should I use?
Use 16-12 AWG speaker wire with banana plugs or bare wire. Ensure proper polarity (+ to +, - to -).
Is the RS 2000.6 magnetically shielded?
No, these speakers are not magnetically shielded. Keep them at least 30 cm away from CRT TVs or sensitive electronics.
What tools are needed for setting up?
Only a screwdriver for the binding posts if you use bare wire, or banana plugs. No special tools required.
Can I bi-wire or bi-amp these speakers?
The speaker has single binding posts, so bi-wiring or bi-amping is not possible without modifications.
Where can I find a replacement tweeter or woofer?
Contact Infinity customer support or an authorized dealer. Spare parts may be available for professional repair.
User questions about Reference RS 2000.6 INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual Reference RS 2000.6 - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference RS 2000.6 by INFINITY.