XPL90 - Pregnant JBL - Free user manual and instructions
Find the device manual for free XPL90 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Brand | JBL |
| Model | XPL90 |
| Dimensions (W x H x D) | 200 x 300 x 250 mm |
| Weight | 4.5 kg (each) |
| Power Handling (RMS) | 60 W |
| Peak Power | 120 W |
| Frequency Response | 50 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 88 dB |
| Driver Configuration | 2-way: 1-inch tweeter, 6.5-inch woofer |
| Enclosure Type | Bass-reflex (ported) |
| Inputs | Binding posts (bi-wire capable) |
| Recommended Amplifier Power | 20 - 100 W per channel |
| Power Supply | Passive (no internal amplification) |
| Placement | Bookshelf or stand-mounted |
| Cleaning Instructions | Wipe with dry cloth; avoid moisture |
| Safety Warnings | Do not expose to water or extreme temperatures |
| Spare Parts Availability | Contact JBL support for replacement drivers or crossovers |
| Warranty | 2 years (varies by region) |
Frequently Asked Questions - XPL90 JBL
How do I connect the JBL XPL90 to my amplifier?
Use standard speaker wire with banana plugs or bare wire. Connect the positive (+) terminal on the speaker to the amplifier's positive output, and negative (-) to negative. The speakers are passive and require an external amplifier.
What is the recommended amplifier power for the XPL90?
JBL recommends an amplifier with 20 to 100 watts per channel (RMS). Make sure the amplifier can handle a 8-ohm load.
Can I use the XPL90 as a center channel speaker?
While it is a bookshelf speaker, you can use it as a center channel in a home theater setup, but it may not match timbre with other JBL models. For best results, use a dedicated center speaker.
How do I clean the XPL90 speakers?
Use a soft, dry microfiber cloth to gently wipe the cabinet. For grilles, vacuum gently with a brush attachment. Avoid using water or cleaning chemicals.
What type of speaker wire should I use?
Use 14-16 gauge speaker wire for runs up to 50 feet. Thicker wire (12 gauge) is recommended for longer distances.
Is the XPL90 magnetically shielded?
The XPL90 is not magnetically shielded. Keep speakers at least 1 meter away from CRT televisions or magnetic media to avoid interference.
Can I bi-wire or bi-amp the XPL90?
Yes, the XPL90 has dual binding posts that can be used for bi-wiring or bi-amping. Remove the metal jumpers between terminals for bi-wiring.
What are the dimensions of the JBL XPL90?
Each speaker measures approximately 200 mm (width) x 300 mm (height) x 250 mm (depth).
Where can I find replacement parts?
Replacement drivers, crossovers, and grilles are available through JBL authorized service centers. Contact JBL customer support for your region.
What is the frequency response of the XPL90?
The frequency response is 50 Hz to 20 kHz, ensuring deep bass and clear highs.
User questions about XPL90 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual XPL90 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XPL90 by JBL.