CS496 - Car Speaker JBL - Free user manual and instructions

Product Type	Car Speaker (Coaxial)
Brand	JBL
Model	CS496
Size	4 x 6 inches (100 x 150 mm)
Speaker Type	2-way Coaxial
Woofer Material	Polypropylene Cone with Rubber Surround
Tweeter Type	1-inch Soft Dome Tweeter
Power Handling (RMS)	60 Watts
Power Handling (Peak)	180 Watts
Impedance	4 Ohms
Sensitivity	92 dB @ 1W/1m
Frequency Response	60 Hz - 21 kHz
Mounting Depth	1.85 inches (47 mm)
Mounting Cutout	3.5 x 5.3 inches (89 x 135 mm)
Woofer Magnet	Ferrite
Operating Temperature Range	-20°C to 60°C
Compliance	CE, RoHS
Weight	1.4 lbs (0.64 kg) per speaker
Installation	Surface mount or flush mount with included brackets
Maintenance	Clean with a soft dry cloth; avoid liquids
Safety Precautions	Disconnect battery before installation; observe polarity; do not expose to moisture
Repairability	No user-serviceable parts; contact authorized JBL service center for repairs
Warranty	1 year limited warranty

Frequently Asked Questions - CS496 JBL

What is the size of the JBL CS496 speaker?

The JBL CS496 is a 4x6 inch (100x150 mm) coaxial speaker, designed to fit standard 4x6 openings in most vehicles.

What is the power handling of the CS496?

It handles 60 Watts RMS and 180 Watts peak, suitable for most factory and aftermarket head units.

What impedance does the CS496 have?

The impedance is 4 Ohms, compatible with standard car audio systems.

How do I install the JBL CS496?

Installation requires mounting in a 4x6 cutout. Use the supplied screws and brackets. Ensure polarity is correct and disconnect the battery before wiring.

Is the CS496 weatherproof?

No, it is not weatherproof. Avoid exposure to moisture and extreme temperatures.

Can I use the CS496 with an amplifier?

Yes, it pairs well with amplifiers delivering up to 60W RMS per channel at 4 ohms.

What is the frequency response of the CS496?

It reproduces frequencies from 60 Hz to 21 kHz, offering solid bass and clear highs.

Does the CS496 come with a grille?

Yes, it includes a protective mesh grille. Some vehicles may require additional mounting adapters.

How do I clean the CS496?

Wipe gently with a soft, dry cloth. Do not use any liquids or cleaners, as they may damage the cone.

What is the warranty on the JBL CS496?

JBL provides a 1-year limited warranty against defects in materials and workmanship.

USER MANUAL CS496 JBL

m ultielements owner's manual

THANK YOU

for purchasing JBL CS Series

automotive speakers. We've organized

this manual to make your installation

as simple and trouble-free as possible.

Please read it thoroughly before proceeding.

Remember to keep your sales receipt and this manual

in a safe place so both are available for future reference.

JBL

Designed and Engineered in the USA

INSTALLATION WARNINGS AND TIPS

ABOUT THESE INSTRUCTIONS

Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install CS Series multielement speakers in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself, but instead ask your authorized JBL car audio dealer about professional installation options.

LOUD MUSIC AND HEARING

Playing loud music in an automobile can hinder your ability to hear traffic as well as permanently damage your hearing. The maximum volume levels achievable with JBL speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. JBL accepts no liability for hearing loss, bodily injury, or property damage as a result of use or misuse of this product.

REAR DECK PRECAUTION

In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location!

INSTALLATION TIPS

• A lways wear protective eyewear when using any tools.
• T urn off all audio components and other electrical devices before you start. Disconnect the (−) negative lead from your vehicle's battery.
• Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker.
• Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface.
• A t the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas.
• B efore drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw.
• For door installations, check the clearance with the windows throughout the range of the window's travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism.
• If mounting speakers elsewhere, check for clearance around rear deck torsion bars, glove box or other structural elements.
• Do not mount speakers where they will get wet.

INSTALLATION

Figure 1. Mounting the speaker (except CS264) using the supplied grilles.

Figure 2. Mounting the CS264.
NOTE: The CS264 is designed to be installed under a factory grille. Consequently, no grilles are packaged with this model.

Figure 3. Mounting the CS206 using the supplied grille.

Figure 4. Mounting the CS206 in a 165mm speaker location.

Technical line drawing of a mechanical component with no visible text or symbols

Figure 5. Mounting the CS206 in a standard speaker location.

Technical line drawing of a mechanical component with no visible text or symbols

NOTE: The CS206 uses an adapter to fit a variety of different 6" openings. Select an appropriate adapter ring and secure it to the vehicle using the sheet-metal screws provided, then attach the speaker to the ring with the machine screws.

JBL

SPECIFICATIONS

	CS205	CS206	CS264	CS265	CS308		CS310	CS396	CS496
Type:	5-1/4" two-way	6-1/2" two-way	4" x 6" two-way	165mm two-way	8" three-way	10" three-way	6" x 9" three-way	6" x 9" four-way
Speaker Impedance:	4 ohms	4 ohms	4 ohms	4 ohms	4 ohms	4 ohms	4 ohms	4 ohms
Power Handling	90W Peak, 30W RMS	120W Peak, 40W RMS	90W Peak, 30W RMS	120W Peak, 40W RMS	210W Peak, 70W RMS	270W Peak, 90W RMS	210W Peak, 70W RMS	210W Peak, 70W RMS
Sensitivity (2.83V, 1m):	91dB	91dB	90dB	91dB	91dB	92dB	91dB	91dB
Frequency Response:	70Hz – 20kHz	55Hz – 20kHz	75Hz – 20kHz	55Hz – 20kHz	50Hz – 20kHz	45Hz – 20kHz	50Hz – 20kHz	50Hz – 21kHz
Mounting Depth:	2-1/4" (58mm)	2" (51mm)	1-11/16" (43mm)	2-3/8" (61mm)	3" (77mm)	4-3/16" (107mm)	3" (77mm)	3" (77mm)
Cut-Out Diameter:	4-11/16" (120mm)	5-1/8" (131mm)	5-3/4" x 3-5/16" (147mm x 85mm)	5-11/16" (145mm)	7-3/16" (183mm)	9-3/16" (234mm)	8-13/16" x 6" (224mm x 153mm)	8-13/16" x 6" (224mm x 153mm)

GENERAL CARE

The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.

A valid serial number is required for warranty coverage.

Features, specifications and appearance are subject to change without notice.

Declaration of Conformity

CE

We, H arman Consumer International

2, route de Tours

72500 Chateau-du-Loir

France

declare in own responsibility that the products

described in this owner's manual are in compliance

with technical standards:

EN 50081-1:1992

EN 50082-1:1997

Emmanuel Millot

Harman Consumer International

Chateau-du-Loir, France. 2/03

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797 USA

1.800.336.4JBL (4525) • FAX [phone] • www.jbl.com

© 2003 Harman International Industries, Incorporated

JBL is a registered trademark of

Harman International Industries, Incorporated.

Part No. CSMEOM2/03

H A Harman International Company

JBL