AT-HDR-EX-100CEA-RX - Extendeur AV Atlona - Free user manual and instructions
Find the device manual for free AT-HDR-EX-100CEA-RX Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Extender Receiver |
| Model | AT-HDR-EX-100CEA-RX |
| Brand | Atlona |
| Video Resolution | Up to 4K@60Hz 4:4:4 |
| HDMI Standard | HDMI 2.0 |
| HDCP Support | HDCP 2.2 |
| Transmission Range | Up to 100 m over CAT6/6a |
| Audio Formats | PCM, Dolby Digital, DTS |
| Control Interfaces | IR pass-through, RS-232 |
| Input Connector | HDMI Type A (female) |
| Output Connector | RJ45 (HDBaseT) |
| Other Connectors | IR (3.5mm), RS-232 (DB-9), DC power |
| Power Supply | 5V DC, 2A (included) |
| Power Consumption | 6.5 W (max) |
| Dimensions (W x D x H) | 120 x 80 x 25 mm |
| Weight | 200 g |
| Housing Material | Metal |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 20% to 90% RH (non-condensing) |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids or solvents. |
| Safety | Use only the supplied power adapter. Do not expose to moisture or heat sources. |
| Spare Parts | Contact Atlona support for replacement power adapters or IR cables. |
| Reparability | Not user-serviceable. Refer to qualified service personnel for repairs. |
Frequently Asked Questions - AT-HDR-EX-100CEA-RX Atlona
What is the maximum video resolution supported by the AT-HDR-EX-100CEA-RX?
The receiver supports up to 4K@60Hz 4:4:4 with HDMI 2.0 and HDCP 2.2.
What cable is needed for transmission?
Use CAT6 or CAT6a cable for distances up to 100 meters.
Does the extender support IR control?
Yes, it features IR pass-through via a 3.5mm connector for remote control signals.
Can I use this receiver with any HDBaseT transmitter?
It is designed to work with the Atlona AT-HDR-EX-100CEA-TX transmitter, but may be compatible with other HDBaseT transmitters following the same standard.
What audio formats are supported?
The unit supports PCM, Dolby Digital, and DTS audio formats.
How do I power the receiver?
Connect the included 5V DC, 2A power adapter to the DC jack. Power over HDBaseT (PoH) is not supported on the receiver.
What are the dimensions of the unit?
The receiver measures 120 x 80 x 25 mm and weighs approximately 200 g.
Is the unit rack-mountable?
No, it is a compact desktop unit. Optional mounting brackets are not included.
My picture is not displaying. What should I check?
Ensure all cables are securely connected, the power adapter is plugged in, and the source and display are set to compatible resolutions. Try a shorter CAT cable or check HDCP compatibility.
How do I clean the device?
Use a soft, dry cloth to wipe the exterior. Avoid liquids or abrasive cleaners.
User questions about AT-HDR-EX-100CEA-RX Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Extendeur AV in PDF format for free! Find your manual AT-HDR-EX-100CEA-RX - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-HDR-EX-100CEA-RX by Atlona.