361307 - Tumble drier MIDEA - Free user manual and instructions
Find the device manual for free 361307 MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Midea |
| Model | 361307 |
| Capacity | 7 kg |
| Dimensions (H x W x D) | 850 mm x 595 mm x 580 mm |
| Weight | 35 kg |
| Energy Rating | A++ |
| Power Supply | 220-240 V, 50 Hz |
| Drying Programs | 12 (including Cotton, Synthetics, Delicates, Mix, etc.) |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Lint Filter | Removable and washable |
| Condenser | Self-cleaning condenser technology |
| Drum Material | Stainless steel |
| Noise Level | 65 dB(A) |
| Energy Consumption (per year) | 235 kWh |
| Overheat Protection | Yes |
| Water Tank Capacity | 3.5 L |
| Reversing Drum | Yes |
| Spare Parts Availability | Genuine spare parts available for 10 years |
Frequently Asked Questions - 361307 MIDEA
How do I install the tumble dryer?
Place the dryer on a level floor with at least 10 cm clearance on all sides. Connect the supplied drain hose to a suitable drain or use the water tank. Plug into a grounded outlet. Level the feet to prevent vibration.
What is the maximum load capacity?
The maximum load is 7 kg of dry laundry. Overloading may affect drying performance and increase drying time.
How do I clean the lint filter?
Open the door and pull out the lint filter. Remove lint by hand or under running water. Dry thoroughly before reinserting. Clean after every cycle for efficient drying.
How often should I clean the condenser?
The condenser should be cleaned every 30 cycles or when the indicator lights up. Remove the condenser unit, rinse with water, and let it dry completely before reinstalling.
What do I do if the dryer doesn't start?
Check if the door is properly closed, the power cord is plugged in, and the circuit breaker is on. Ensure the start button is pressed. If the problem persists, contact customer service.
Can I dry delicate fabrics?
Yes, use the Delicates program with low heat. Always check garment labels for drying instructions. Remove items promptly to reduce wrinkles.
How do I set the delay start?
Select a program, then press the Delay Start button. Use the +/- buttons to set the delay time (1-24 hours). Press Start. The dryer will begin at the set time.
Why is the drying cycle taking longer than usual?
Possible causes: overloaded drum, clogged lint filter, dirty condenser, or room temperature too low. Ensure proper maintenance and avoid overloading.
Is the child lock feature available?
Yes, press and hold the Child Lock button for 3 seconds to activate. The indicator light will turn on. Repeat to deactivate. This prevents accidental button presses.
What should I do if the dryer stops mid-cycle?
Check for power failure, door opened, or water tank full. If the tank is full, empty it and restart. If error persists, note the error code and consult the troubleshooting section of the manual.
User questions about 361307 MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual 361307 - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 361307 by MIDEA.