B3T47239A - Tumble drier BEKO - Free user manual and instructions
Find the device manual for free B3T47239A BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Model | B3T47239A |
| Brand | Beko |
| Energy Class | A++ |
| Drying Capacity | 7 kg |
| Drum Volume | 100 L |
| Dimensions (H x W x D) | 85 x 60 x 58 cm |
| Weight | 35 kg |
| Power Consumption | 2.5 kWh per cycle |
| Noise Level | 65 dB(A) |
| Drying System | Condenser |
| Motor Type | Inverter Motor |
| Drum Material | Stainless Steel |
| Programs | Cotton, Synthetics, Delicates, Mix, Daily, Iron Assist, Extra Dry |
| Key Features | Sensor Drying, Reverse Tumbling, Anti-Crease, Delay Start, Child Lock |
| Filter | Lint filter with cleaning indicator |
| Condenser | Self-cleaning condenser |
| Safety Features | Overheating protection, Child lock |
| Installation | Freestanding, requires water drain or tank |
| Spare Parts | Drum belt, heating element, door seal, filter, condenser unit |
| Maintenance | Clean lint filter after each cycle; clean condenser every few months |
Frequently Asked Questions - B3T47239A BEKO
How do I clean the lint filter on the Beko B3T47239A?
Open the door and pull the lint filter out from the door opening. Remove the lint by hand or with a soft brush. Rinse under running water if necessary, then dry thoroughly before reinserting. Clean after every cycle.
Why is my dryer not drying the clothes completely?
Check that the lint filter and condenser are clean. Ensure the water tank is not full. Also, verify that you selected the correct program and drying level. Overloading can also cause incomplete drying.
How do I reset the Beko B3T47239A tumble dryer?
Unplug the dryer for 1 minute, then plug it back in. If the issue persists, press the Start/Pause button for 3 seconds to cancel the cycle. For persistent errors, consult the manual.
What do error codes on the display mean?
Common codes: E01 (door not closed), E02 (water tank full), E03 (condenser clogged). Refer to the manual for a full list. Most errors require cleaning or resetting.
How often should I clean the condenser?
Clean the condenser every 3-6 months depending on usage. Remove the lower panel, pull out the condenser unit, rinse with water, and dry before reinserting. The indicator light will remind you.
Can I dry all types of fabrics in this dryer?
No. Avoid drying items labeled do not tumble dry, such as wool, silk, or items with foam padding. Use the Delicates program for sensitive fabrics. Always check care labels.
How can I prevent wrinkles in my clothes?
Use the Anti-Crease feature or the Iron Assist program. Remove clothes promptly after the cycle ends. Do not overload the drum.
Can I reverse the door hinge direction?
Yes, the door is reversible. Contact Beko service or a qualified technician to perform the reversal. It involves moving hinges and door catch to the opposite side.
What is the energy consumption of the B3T47239A?
The energy consumption is approximately 2.5 kWh per full load cycle. The dryer is rated A++ for efficiency, meaning it uses less power than older models.
How do I install the Beko B3T47239A dryer?
Place the dryer on a level floor. Remove all packaging. Connect the drainage hose to a floor drain or empty the water tank after each cycle. Ensure adequate ventilation. Do not install in a freezing room.
User questions about B3T47239A BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual B3T47239A - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B3T47239A by BEKO.