DFS 46710 SS - Dishwasher TEKA - Free user manual and instructions
Find the device manual for free DFS 46710 SS TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Teka |
| Model | DFS 46710 SS |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Installation Type | Fully Integrated |
| Capacity | 14 Place Settings |
| Energy Efficiency Class | E (EU) |
| Annual Energy Consumption | 294 kWh |
| Water Consumption per Cycle | 10.5 L |
| Noise Level | 49 dB(A) |
| Number of Programs | 6 (Eco, Auto, Intensive, Quick, Glass, Pre-rinse) |
| Drying System | Condensation Drying |
| Delay Start | Yes (up to 24 hours) |
| Safety Features | Water Leak Protection, Child Lock, Anti-Flood System |
| Control Panel | Electronic Touch Controls |
| Display | LED Digital Display |
| Interior Material | Stainless Steel |
| Cutlery Basket | 3rd Rack Cutlery Tray |
| Adjustable Racks | Height-Adjustable Upper Basket |
| Water Connection | Cold Water Only |
| Power Supply | 220-240 V, 50 Hz |
| Net Weight | 47 kg |
| Spare Parts Availability | Spare parts available for 10 years after last production |
| Repairability Index | 7.5 / 10 |
Frequently Asked Questions - DFS 46710 SS TEKA
How to install the Teka DFS 46710 SS dishwasher?
Ensure the installation area is level and the water and electrical connections are ready. Refer to the installation manual for detailed steps, including leveling the appliance and connecting the inlet hose.
What programs does the dishwasher have?
The dishwasher offers 6 programs: Eco (energy-saving), Auto (sensor-based), Intensive (heavy soil), Quick (light loads), Glass (delicate items), and Pre-rinse.
How to clean the filters?
Turn off the dishwasher, remove the lower rack, and unscrew the filter assembly. Rinse under running water with a soft brush. Reinstall securely. Clean filters every month to maintain performance.
What does the error code E15 mean?
Error E15 indicates a water leak detection. Check the inlet hose connections and the base tray for water. If dry, reset the appliance by unplugging for 30 seconds. If persists, contact service.
Can I use dishwasher salt?
Yes, use specially formulated dishwasher salt to soften water and prevent limescale. Fill the salt reservoir before starting a cycle. Adjust the salt dosage according to your water hardness.
How to activate child lock?
Press and hold the Child Lock button (if available) for 3 seconds. A symbol will appear on the display. Deactivate by pressing and holding again.
Why dishes are not drying properly?
Ensure the rinse aid reservoir is full and the dosage is set correctly. Use the Eco program with drying assist. Also, open the door slightly after cycle for steam release.
What is the noise level?
The noise level is 49 dB(A), which is relatively quiet and suitable for open-plan living areas.
How to replace the inlet hose?
Only use an original Teka replacement hose. Turn off water supply, disconnect the old hose, and connect the new one. Ensure the rubber gasket is properly seated. Test for leaks.
Where to find the serial number?
The serial number is located on the rating plate, which is on the right side of the dishwasher door. It is a 12-digit code required for service requests.
User questions about DFS 46710 SS TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DFS 46710 SS - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFS 46710 SS by TEKA.