Glemm BSO 60IP - Loudspeaker

BSO 60IP - Loudspeaker Glemm - Free user manual and instructions

Find the device manual for free BSO 60IP Glemm in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Glemm BSO 60IP - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type PA Speaker (100V constant voltage system)
Brand Glemm
Model BSO 60IP
Max Power 60W
RMS Power 30W
Speakers 2 x 5.5" woofers
Impedance 100V (constant voltage)
Frequency Response 80 Hz - 18 kHz
Housing Material Aluminum
Dimensions (W x H x D) 175 x 367 x 125 mm
Weight 3.77 kg
Mounting Wall or ceiling bracket included
Connection Type 100V constant voltage (COM and 100V terminals)
Power Supply 100V line from compatible amplifier
Certification CE compliant
Warranty According to national and EU regulations
Installation Must be carried out by specialized technicians
Safety 100V on terminals during operation; ensure amplifier is off before installation
Compliance CE marking
Included Accessories Mounting bracket
Country of Origin Made in P.R.C.

Frequently Asked Questions - BSO 60IP Glemm

What type of amplifier is compatible with the Glemm BSO 60IP speaker?
The speaker is designed for 100V constant voltage PA systems. Connect the COM terminal to the amplifier's COM socket and the 100V terminal to the amplifier's 100V socket.
Can I connect multiple BSO 60IP speakers to one amplifier?
Yes, you can connect multiple speakers in parallel (fig.1). Ensure the total power of all speakers does not exceed the amplifier's power.
What is the power rating of the BSO 60IP?
The speaker has a maximum power of 60W and RMS power of 30W.
What are the dimensions and weight of the speaker?
Dimensions: 175 x 367 x 125 mm (W x H x D). Weight: 3.77 kg.
What type of mounting bracket is included?
A bracket for wall or ceiling placement is included with the speaker.
Is the BSO 60IP suitable for outdoor use?
The manual does not specify an IP rating, but the model name '60IP' may suggest some ingress protection. However, for safety, it should be installed indoors or in protected areas.
How should I clean the speaker?
The manual does not provide specific cleaning instructions. Use a dry cloth to clean the aluminum housing. Avoid liquids and abrasive materials.
What is the warranty coverage?
The product is covered by warranty according to current national and European regulations. Visit www.glemm.eu for full warranty conditions.
Can I replace the speaker drivers myself?
The manual states that installation must be carried out exclusively by specialized technicians. For repairs, contact technical service via www.glemm.eu.
What does the CE marking indicate?
The CE marking indicates that the product complies with the essential requirements of applicable European directives and related standards.

User questions about BSO 60IP Glemm

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual BSO 60IP - Glemm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSO 60IP by Glemm.

USER MANUAL BSO 60IP Glemm

Model name: BSO 60IP

Audio speaker operating 100V and intended for PA SYSTEM. The high quality of the components used for its construction guarantees an excellent acoustic performance. The installation of this product must be carried out exclusively by specialized technicians, skilled in electric and audio systems.

In case of wrong installation or connections, the manufacturer doesn't take any responsibility for damages to people or objects.

Glemm BSO 60IP - Model name: BSO 60IP - 1

Refer to the below picture for correct cable connection. Before starting the installation, make sure that the amplifier is off. During operation there is a tension of 100V on the connection terminals, which could be dangerous.

Keep the instruction manual for future reference. Use the included bracket for correct wall or ceiling placement.

CONNECTION

This speaker operates with constant tension and is therefore suitable for connection to 100V systems. Make sure to connect the speaker's com terminal to the "COM" socket of the amplifier, while the speaker's 100V terminal is to be connected to the 100V socket of the amplifier.

If you need to connect more than one speaker, after checking the total power, you can connect them to the amplifier with a "parallel" connection (fig.1).

Remember to consider the correct section of the cables, according to the distance of the speakers from the amplifier.

Glemm BSO 60IP - CONNECTION - 1

Consider carefully the power of the speakers and of the amplifier to which they are connected: the total power of the speakers must not exceed the amplifier's power.

COMPLIANCE, WARRANTY AND SERVICE

The CE brand indicates that the product complies with the essential requirements of the applicable European directives and related standards.

The product is covered by warranty according to current national and European regulations. For complete warranty conditions and for technical service requests visit the website: www.glemm.eu

We also suggest to register your product, by logging into the website's private area. In this way you will have the possibility to receive updates and information on our items.

The manufacturer, in order to improve its products, reserves the right to modify the characteristics whether technical or aesthetic, at any time and without notice.

CARATTERISTICHE TECNICHE / TECHNICAL SPECIFICATIONS
Potenza Massima / RMSMax power/ RMS power60W / 30W RMS
Altoparlante / Speaker2 x 5,5" woofers
Impedenza / ImpedanceTensione / voltage---100V
Risposta in frequenzaFrequency response80 Hz - 18 KHz
Inclusi / IncludedStaffa di fissaggio / Bracket
Struttura / CaseAlluminio / Aluminium
Dimensioni / Dimensions175 x 367 x 125 mm (l x h x p)
Peso / Weight3.77 Kg

Fig.1 15W 10W 10W 6W com 100V Public Address Amplifier Ampli= 100W Example: Speakers = 41W Ampli = 100W OK !

PRODOTTO DA / PRODUCED BY:

KARMA ITALIANA Srl

Via Gozzano 38/bis

21052 Busto Arsizio (VA)

www.karmaitaliana.it

Glemm BSO 60IP - COMPLIANCE, WARRANTY AND SERVICE - 2

www.glemm.eu

Made in P.R.C.

Glemm BSO 60IP - COMPLIANCE, WARRANTY AND SERVICE - 3

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Glemm

Model : BSO 60IP

Category : Loudspeaker