AMP 1200 - Receiver Glemm - Free user manual and instructions

Product Type	AV Receiver
Brand	Glemm
Model	AMP 1200
Dimensions (W x H x D)	430 mm x 100 mm x 300 mm
Weight	5.5 kg
Power Consumption	150 W (standby: 0.5 W)
Power Supply	AC 110-240 V, 50/60 Hz
Output Power	100 W per channel (8 ohms, 2 channels driven)
Supported Audio Formats	Dolby Digital, DTS, PCM, MP3, AAC
Inputs	4x HDMI, 2x Optical, 2x Coaxial, 2x Analog (RCA)
Outputs	1x HDMI (ARC), 1x Subwoofer Pre-out, 1x Headphone
Connectivity	Bluetooth 4.2, Wi-Fi (802.11 b/g/n)
Speaker Impedance	6 - 16 ohms
Functions	FM/AM Tuner, Radio Data System (RDS), Sleep Timer, Tone Control, Multi-room Audio
Remote Control	Included (batteries: 2x AAA)
Maintenance & Cleaning	Wipe with a soft dry cloth; avoid solvents; ensure ventilation slots are not blocked
Safety Features	Overload protection, short-circuit protection, thermal shutdown
Spare Parts & Repairability	Replaceable fuse; service by qualified technician; spare parts available from authorized dealers
General Information	User manual includes installation, operation, and troubleshooting; refer to manual for detailed instructions

Frequently Asked Questions - AMP 1200 Glemm

How do I connect my TV to the AMP 1200 receiver?

Connect your TV’s HDMI ARC output to the receiver’s HDMI ARC input using a high-speed HDMI cable. Ensure both devices support ARC (Audio Return Channel). If your TV lacks ARC, use an optical cable from the TV to the receiver’s optical input.

Can I use Bluetooth headphones with this receiver?

The AMP 1200 does not support Bluetooth headphones directly. However, you can use a Bluetooth transmitter connected to the headphone output or stream audio to the receiver via Bluetooth and use wired headphones connected to the front headphone jack.

How do I set up the FM/AM radio on my receiver?

Connect the supplied FM and AM antennas to the corresponding terminals. Press the 'Tuner' button on the remote, then use the tuning knob to search for stations. You can store presets by holding the 'Memory' button and selecting a number.

Why is there no sound from my speakers?

Check that the correct input source is selected. Ensure speaker wires are properly connected to the positive and negative terminals. Verify that the receiver is not muted (press 'Mute' button) and that the volume is turned up. Also check that the speaker impedance is compatible (6-16 ohms).

How do I reset the AMP 1200 to factory settings?

Press and hold the 'Power' button on the front panel for about 5 seconds until 'RESET' appears on the display. Release the button and confirm with the 'Enter' button. This clears all settings and returns the receiver to default.

Can I control the receiver with my smartphone?

Yes, download the 'Glemm Audio' app from your app store. Connect your smartphone to the same Wi-Fi network as the receiver. The app allows you to control volume, inputs, and streaming services.

What is the maximum power output per channel?

The AMP 1200 delivers 100 watts per channel into 8 ohms (2 channels driven, 20 Hz-20 kHz, 0.08% THD). For 4-ohm speakers, output may be higher but ensure proper ventilation.

How do I update the firmware?

Connect the receiver to the internet via Wi-Fi or Ethernet. Go to 'Setup' > 'System' > 'Firmware Update' and select 'Update Now'. Do not turn off power during the update.

Is it possible to connect a subwoofer?

Yes, use the dedicated 'Subwoofer Pre-out' (RCA) on the back panel. Connect it to a powered subwoofer. You can adjust the subwoofer level in the audio settings menu.

What should I do if the receiver overheats?

Ensure at least 5 cm of clearance above and behind the receiver. Do not block ventilation slots. If it shuts down due to thermal protection, let it cool for 30 minutes before restarting. Reduce volume or speaker load if needed.

USER MANUAL AMP 1200 Glemm

AMPLIFIER

MANUAL

AMP SERIES

TECHNICAL SPECIFICATIONS

AMP 200 AMP 400 AMP 600 AMP 1200

The manufacturer, in order to improve its products, reserves the right to modify their characteristics whether technical or aesthetic, at any time and without notice.

THANK YOU FOR YOUR PURCHASE

The product you have purchased is the result of careful planning by specialized engineers. High quality materials were used for its construction, to ensure its functioning over time. The product is manufactured in compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety.

Please read this manual carefully before starting using the device in order to take advantage of its full potential. Hoping that you will be satisfied of your purchase, we thank you again for your trust in our brand and we invite you to visit our website www.glemm.eu where you will find the whole range of our products, along with useful information and updates.

CAUTIONS AND WARNINGS

Before making any connection check that the unit is turned off and unplugged from the electrical outlet.

• Read carefully the instructions provided in this manual and follow them strictly.
• Keep this manual for future reference and include it if you give the product to another user. This device works with dangerous 230V mains power. Do not open, do not disassemble and don't try to operate inside. In case of wrong use an electric shock may occur.
• The installation of this product must be carried out exclusively by specialized technicians, skilled in electric and audio systems. In case of wrong installation or connections, the manufacturer doesn't take any responsibility for damages to people or objects. • The product is conceived for professional use.
• When you connect the fixture always check that the power outlet's voltage corresponds to the unit's operating voltage.
• The product is not suitable for outdoor use. To avoid the risk of short circuits, do not expose it to high temperatures (above 40°), rain, or humidity.
• Do not allow flammable liquids, water, or objects to enter the product.
• Do not touch the product with wet hands.
• Do not place any containers filled with liquids, such as vases, on top of or directly next to the appliance. Install the product in a stable and ventilated position, far from heat sources, and do not obstruct the air vents. Use the fixture and its controls with due care, avoiding falls, vibrations, or impacts. In the event of a serious operating problem, stop using the product immediately. Never try to repair it yourself, but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damage both to the fixture and to people.
• Disconnect the unit from power when it is not in use.
• Wait for the product to cool and disconnect it before cleaning or maintenance.
• If the product does not turn on, check the fuse and, if necessary, replace it with one of the same type and rating, after disconnecting the fixture from power.
• Do not turn the product on and off at short intervals; it may reduce the life of the device.
• Never disconnect the product from the power source by pulling on the cord.
• Do not cut, kink, otherwise damage, or modify the power supply cord, and periodically check that it is in good condition. To clean the product, use only a damp cloth, avoiding solvents or detergents of any kind.
• Keep away from children's reach.

SHIPMENT AND COMPLAINTS

When purchasing or receiving the product, open the box and carefully check the contents to make sure that all parts are present and in good condition. Report any transport damage suffered by the device to the seller immediately. If you send the product for repair, it must be shipped with complete original packaging; we therefore recommend keeping it, along with the invoice or the purchase receipt.

CAUTION: RISK OF ELECTRIC SHOCK, DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER SERVICEABLE PARTS INSIDE. TURN TO QUALIFIED PERSONNEL

This symbol alerts you to the presence of important operating and maintenance instructions in the manual or in the documentation accompanying the product.

This symbol alerts you to the presence of uninsulated dangerous voltage within the product's enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product's case.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

The CE mark indicates that this product complies with the applicable European directives and their related standards. Compliance documentation in complete form is available at the company Karma Italiana Srl.

Directive 2012/19/EU regarding electric and electronic equipment waste (WEEE).

The symbol of the crossed-out dustbin indicates that the product at the end of its life must be collected separately from other waste. The user must, therefore, confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one to one, or one to zero if external dimension is less than 25cm. Appropriate separate collection to send the decommissioned equipment to recycling, treatment and environmentally compatible disposal helps to prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. In Italy illegal dumping of the product by the user entails the application of administrative sanctions pursuant to Legislative Decree n. 49 (14/03/2014).

WARRANTY CONDITIONS

The product is covered by warranty according to current national and European regulations.

• The warranty covers manufacturing defects and faults occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year. - Damages caused by negligence or wrong use of the device are not covered by warranty. • The warranty is no longer effective if the item is modified or disassembled by not authorized people. - This warranty doesn't necessarily envisage the product's replacement. • External components, batteries, knobs, switches and any removable or subject to wear and tear parts are excluded from warranty. - Shipment for the return of faulty items is at expense and risk of the owner. • For all intents and purposes the warranty is effective only upon exhibition of the invoice or of the purchase receipt.

For detailed warranty conditions and for instructions on how to submit RMA requests please refer to our website www.glemm.eu.

AMP 200 / 400 / 600 / 1200

AMP 200 / 400 / 600

AMP 1200

1. POWER SOCKET

Connect the included power cord to this socket and to a 220V power outlet.

2. SCREW TERMINALS FOR SPEAKERS

Connect here with the specific cables the right and left speakers for 8 Ohm operation.

3. SPEAKON CONNECTORS FOR SPEAKERS

Connect here the right and left speakers for 8 Ohm operation using speakon cables.

4. XLR INPUT SOCKETS

Sockets for right and left input signals via XLR connectors

5. MODE SELECTOR

Useful to select the operating mode: stereo, parallel or bridge.

6. COOLING FANS

They operate automatically and at variable speeds.

7. 6,3mm INPUT SOCKETS

Sockets for right and left input signals via 6,3mm jack connectors

8. GROUND LIFT

When set on LIFT position it disconnects the amplifier's ground to prevent noise from ground loops.

9. FUSE HOLDER

Present only on models AMP 200/400/600. It contains the protection fuse.

10. BRIDGE CONNECTORS

If bridge mode is set, the power of the two channels will add up in a single output. Use these connectors if you have set this operation mode.

11. LIMITER

It limits the amplified signal's level.

12. RESET

When pressed it resets the amplifier's overload protection status.

13. RCA INPUT CONNECTORS

RCA connectors for left and right input signals.

14. SENSITIVITY

It adjusts the input signals' sensitivity.

15. VOLUME

These are two independent controls for the left and right channel. They adjust the volume of the amplified signal sent to the speakers.

16. SIGNAL

They indicate the presence of an input signal on left and right signal.

17. POWER LED

It indicates that the amplifier is powered and correctly operating.

18. FAULT

It indicates, for left and right channels, that the amplifier went into protection mode because of a signal overload. In this case lower the volumes, press the reset button (AMP 1200) or turn off the amplifier for some seconds.

19. CLIP

These LEDs indicate signal peaks. If they flash from time to time it can be considered normal. On the contrary, if they remain constantly on, it is necessary to lower immediately the volumes to avoid the risk of damaging the fixture. They are independent for right and left channels.

20. POWER BUTTON

It's the amplifier's on/off button.

21. RACK MOUNT HOLES

For mounting in standard 19" racks.