AXABH-LX2 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXABH-LX2 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Headset |
| Model | AXABH-LX2 |
| Brand | AXESS |
| Bluetooth Version | 5.0 |
| Battery Capacity | 150 mAh |
| Battery Type | Lithium-ion rechargeable |
| Charging Time | 2 hours |
| Playback Time | Up to 8 hours |
| Standby Time | Up to 100 hours |
| Driver Diameter | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Weight | 180 g |
| Dimensions (folded) | 200 x 180 x 80 mm |
| Connectivity | Bluetooth, 3.5 mm AUX (cable included) |
| Controls | Volume +/-, Next/Previous Track, Play/Pause, Answer/End Call |
| Microphone | Built-in, noise reduction |
| Charging Port | Micro USB |
| Operating Range | 10 meters |
| Included Accessories | USB charging cable, 3.5 mm audio cable, user manual |
| Care and Cleaning | Wipe with a dry cloth, keep away from moisture and extreme temperatures |
| Safety Warnings | Do not disassemble or expose to water; avoid high volume to prevent hearing damage |
| Spare Parts Availability | Contact AXESS support for replacement ear pads or cables |
| General Information | Wireless Bluetooth headset for music and calls; foldable design for portability |
Frequently Asked Questions - AXABH-LX2 AXESS
How do I put the AXABH-LX2 into pairing mode?
Press and hold the power button for about 3 seconds until the LED indicator flashes red and blue alternately. The headset will then be discoverable on your device.
Can I use the headset while charging?
Yes, you can use the headset while it is charging via the Micro USB port. However, charging may take longer if in use.
How do I reset the headset?
To reset, turn off the headset and press and hold both the volume up and down buttons for 5 seconds. The LED will flash white, then turn off. Re-pair with your device.
What is the battery life of the AXABH-LX2?
The battery lasts up to 8 hours of continuous playback or up to 100 hours on standby. Actual battery life may vary with volume level and usage.
Can I connect the headset to a non-Bluetooth device?
Yes, you can use the included 3.5 mm audio cable to connect the headset to devices with a headphone jack, such as older audio players.
How do I answer a call?
When a call comes in, press the multifunction button once to answer. Press again to hang up. Double-press to reject a call.
My headset is not charging, what should I do?
Ensure the charging cable is fully inserted into the headset and a power source. Try a different cable or power adapter. If the issue persists, the battery may need service.
Can I use the headset with multiple devices?
The headset can pair with multiple devices but will only connect to one at a time. To switch, disconnect from the current device and connect to the other via Bluetooth settings.
What does the LED indicator mean?
Flashing red and blue: pairing mode. Solid blue: connected and idle. Flashing blue: playing audio. Solid red: charging. Red light off: fully charged.
How do I clean the ear cushions?
Remove the ear cushions if possible and wipe with a damp cloth. Let them air dry completely before reattaching. Do not use harsh chemicals.
User questions about AXABH-LX2 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXABH-LX2 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXABH-LX2 by AXESS.