IPC2A22SA-DZK - Camera UniView - Free user manual and instructions
Find the device manual for free IPC2A22SA-DZK UniView in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Surveillance Camera |
| Model | IPC2A22SA-DZK |
| Resolution | 2 Megapixels (1920 x 1080) |
| Lens | 2.8 mm fixed lens |
| IR Distance | Up to 30 m (98 ft) |
| Day/Night Mode | Yes, with IR cut filter |
| Video Compression | H.265+ / H.265 / H.264 |
| Power Supply | PoE (802.3af) or 12 V DC |
| Power Consumption | < 7 W |
| Weatherproof Rating | IP67 |
| Operating Temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
| Dimensions (Ø x L) | 70 mm x 200 mm (2.76 in x 7.87 in) |
| Weight | Approx. 0.5 kg (1.1 lb) |
| Housing Material | Aluminum alloy |
| Mounting | Wall or ceiling mount |
| Supported Protocols | TCP/IP, IPv4, HTTP, HTTPS, FTP, SMTP, NTP, DNS, DDNS, RTSP, ONVIF |
| Motion Detection | Yes, configurable areas |
| SD Card Slot | Up to 256 GB (not included) |
| Audio | Two-way audio (built-in mic and speaker) |
| Alarm I/O | 1 input, 1 output |
| Warranty | 2 years |
Frequently Asked Questions - IPC2A22SA-DZK UniView
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds while powered on. The default IP is 192.168.1.10.
How can I access the camera remotely?
Use the UniView app or web browser. For internet access, set up port forwarding or use P2P (cloud) service after enabling in the camera's network settings.
What PoE standard is required?
IEEE 802.3af PoE (Power over Ethernet) or use a 12V DC adapter if PoE is not available.
How do I adjust the camera settings?
Access the camera's web interface via its IP address. Default username and password are 'admin' and 'admin123' (change after first login). Navigate to Configuration > Image to adjust brightness, contrast, etc.
Can I use an SD card for local recording?
Yes, insert a microSD card (up to 256 GB) into the slot. Enable recording in the camera's settings under Storage > SD Card.
How do I update the firmware?
Download the latest firmware from UniView's official website. Go to the camera's web interface, Maintenance > Upgrade, select the file and confirm. Do not power off during update.
Why is my camera not showing any video?
Check power and network connections. Ensure the camera is on the same subnet as your PC. Try pinging the camera's IP. If using PoE, verify the switch supports 802.3af. Reset if necessary.
How do I mount the camera?
Use the included mounting bracket. Drill holes for screws and cable entry. Attach bracket to wall/ceiling, secure camera, and connect cables. Adjust angle as needed.
The IR LEDs are not working at night – what should I do?
Check the Day/Night mode setting in the web interface. Ensure the IR cut filter is set to 'Auto' or 'Night'. Also clean the IR LED lenses with a soft cloth.
How can I integrate this camera with an NVR?
This camera supports ONVIF Profile S. Add it to your NVR by scanning the network or entering its IP address, username, and password. Use port 80 for HTTP or 554 for RTSP.
User questions about IPC2A22SA-DZK UniView
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual IPC2A22SA-DZK - UniView and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPC2A22SA-DZK by UniView.