EKVDX80A2VEB - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free EKVDX80A2VEB DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ducted Air Conditioner (Indoor Unit) |
| Brand | Daikin |
| Model | EKVDX80A2VEB |
| Cooling Capacity (kW) | 8.0 |
| Heating Capacity (kW) | 8.5 |
| Power Supply | 230V / 50Hz / 1 Phase |
| Current (A) | 10 |
| Refrigerant | R32 |
| Dimensions (W x H x D) (mm) | 900 x 200 x 600 |
| Weight (kg) | 35 |
| Sound Level (Indoor) (dB(A)) | 30 (Low) - 45 (High) |
| Airflow (m³/h) | 1200 |
| Energy Efficiency Class | A+ |
| Operating Temperature Range (°C) | -10 to 46 (Cooling) / -15 to 20 (Heating) |
| Inverter Technology | Yes |
| Auto Swing | No (Ducted) |
| Timer Function | Yes |
| Self-Cleaning Function | Yes |
| Filter Type | Washable, Antibacterial |
| Installation Type | Concealed Duct |
| Maintenance | Clean filter every 2-4 weeks |
| Warranty (Years) | 5 (Parts & Labor) |
Frequently Asked Questions - EKVDX80A2VEB DAIKIN
How do I clean the filters on my Daikin EKVDX80A2VEB?
Turn off the unit and open the return air panel. Remove the filters and vacuum or wash them with mild soap and water. Allow filters to dry completely before reinstalling.
What does it mean when the unit is not cooling?
Check if the filter is dirty, ensure the thermostat is set to cool mode, and verify the outdoor unit is running. Also confirm that the refrigerant level is adequate.
How do I reset the error code on my Daikin air conditioner?
Turn off the unit using the remote control and disconnect power for 5 minutes. Restore power and turn on the unit. If the error persists, contact a Daikin service center.
Can I install the EKVDX80A2VEB myself?
No. Installation must be performed by a qualified professional due to electrical, refrigerant, and ductwork requirements. Improper installation may void warranty.
How do I set the timer on the remote control?
Press the TIMER button on the remote. Use the + / - buttons to set the desired on or off time. Press SET to confirm. The unit will operate accordingly.
What is the recommended maintenance schedule?
Clean the air filters every 2-4 weeks. Schedule professional maintenance (coil cleaning, refrigerant check) at least once a year.
Why is my unit making a noise?
Normal sounds include a swoosh of refrigerant and fan noise. If you hear a clicking or banging, check for loose panels or debris in the fan. Contact technician if unusual.
How do I switch between cool and heat mode?
Press the MODE button on the remote control until the desired mode (Cool, Heat, Fan, Dry) is displayed. The unit will switch accordingly.
What does the blinking light on the indoor unit mean?
A blinking light typically indicates a fault code. Refer to the user manual to interpret the blink pattern. It may indicate a sensor or communication error.
Can I use a third-party remote control?
Daikin recommends using only the original remote control or Daikin authorized replacements to ensure proper communication and functionality.
User questions about EKVDX80A2VEB DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual EKVDX80A2VEB - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKVDX80A2VEB by DAIKIN.