259-KBI-16/E - Fridge MPM - Free user manual and instructions
Find the device manual for free 259-KBI-16/E MPM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fridge |
| Brand | MPM |
| Model | 259-KBI-16/E |
| Capacity | Approx. 90 liters |
| Energy Class | F |
| Noise Level | 40 dB(A) |
| Dimensions (H x W x D) | 85 x 50 x 55 cm |
| Weight | 25 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 100 kWh/year |
| Climate Class | N-ST |
| Temperature Range | 0°C to 8°C |
| Defrost Type | Manual |
| Shelves | 3 glass shelves |
| Vegetable Crisper | 1 |
| Door Shelves | 3 |
| Reversible Door | Yes |
| Refrigerant | R600a |
| Maintenance | Clean interior with mild soap, defrost regularly |
| Safety Features | Non-CFC foam insulation, thermostat control |
| Spare Parts Availability | Contact manufacturer or authorized service centers |
Frequently Asked Questions - 259-KBI-16/E MPM
How do I adjust the temperature on my MPM 259-KBI-16/E fridge?
The temperature is controlled by a thermostat dial inside the fridge. Turn it to a higher number for colder temperature (typically 3-5 for normal use).
What should I do if the fridge is not cooling properly?
Check that the door is closing properly, the thermostat is set correctly, and the rear coils are clean. Allow 24 hours after first installation for temperature to stabilize.
How do I defrost the fridge?
This model requires manual defrosting. When ice build-up exceeds 5mm, unplug the fridge, remove food, and leave the door open until ice melts. Do not use sharp tools.
Can I reverse the door opening direction?
Yes, the door is reversible. Refer to the user manual for step-by-step instructions on how to change the door swing.
What is the noise level of this fridge?
The noise level is approximately 40 dB(A), which is normal for a compact fridge. Some sounds from the compressor and refrigerant are expected.
How can I clean the fridge?
Unplug the fridge before cleaning. Use a mild detergent and warm water to wipe interior surfaces. Avoid abrasive cleaners. Dry thoroughly before plugging back in.
What type of refrigerant does the MPM 259-KBI-16/E use?
It uses R600a (isobutane), a flammable but environmentally friendly refrigerant. Ensure proper ventilation and avoid damaging the cooling circuit.
How long does it take to reach the set temperature after plugging in?
Typically 2 to 4 hours, but for best results, avoid opening the door frequently and do not overload initially.
What is the energy class of this fridge?
The energy class is F (new EU scale). It consumes approximately 100 kWh per year.
Where can I find spare parts or get repairs?
Contact MPM customer service or an authorized service center. Use only genuine parts to ensure safety and warranty compliance.
User questions about 259-KBI-16/E MPM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual 259-KBI-16/E - MPM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 259-KBI-16/E by MPM.