R163-S35 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free R163-S35 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | GIGABYTE |
| Model | R163-S35 |
| Form Factor | 1U Rackmount |
| Processor Support | Intel Xeon Scalable 3rd Gen (LGA 4189) |
| Memory | 16 x DDR4 DIMM slots, up to 2TB RDDR4 |
| Storage | 8 x 2.5" SATA/SAS hot-swap bays |
| Network | 2 x 10GbE RJ45, 2 x 1GbE RJ45 |
| Expansion Slots | 1 x PCIe 4.0 x16 (LP), 1 x PCIe 4.0 x8 (LP) |
| Power Supply | Dual redundant 800W Platinum |
| Cooling | 4 x hot-swap system fans |
| Management | BMC with IPMI 2.0, dedicated management port |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Dimensions (W x D x H) | 17.2 x 25.6 x 1.7 inches (438 x 650 x 43.5 mm) |
| Weight | 28 lbs (12.7 kg) without drives |
| Chassis Color | Black |
| Compliance | CE, FCC, RoHS |
| Warranty | 3-year limited |
| Maintenance | Clean dust filters monthly; update firmware via BMC |
| Safety Precautions | Disconnect power before servicing; use ESD strap |
| Spare Parts Availability | PSU, fan modules, drive caddies, DIMMs available from GIGABYTE |
Frequently Asked Questions - R163-S35 GIGABYTE
What processors are supported by the GIGABYTE R163-S35?
The R163-S35 supports Intel Xeon Scalable 3rd Gen processors (LGA 4189).
How do I install an operating system on this server?
Boot from installation media (USB/DVD) via BIOS boot menu. Enable UEFI for modern OS. Use RAID configuration utility first if needed.
How to update the BIOS or BMC firmware?
Download the latest firmware from GIGABYTE's support site. Use the BMC web interface or a USB drive with UEFI shell to flash. Always backup current settings.
What RAID configurations are possible?
The onboard SATA controller supports software RAID 0/1/5/10. For hardware RAID, install a dedicated PCIe RAID card.
How do I access the remote management interface?
Connect to the dedicated management port (default IP: 192.168.1.10). Use a web browser to access the BMC login. Default credentials are admin/admin (change immediately).
Can I mix different sizes of memory modules?
Yes, but for optimal performance use identical DIMMs in corresponding channels. Consult the manual for population rules.
How do I replace a failed hard drive?
The server supports hot-swap drives. Remove the failed drive from its bay, insert a new drive, and rebuild the array via RAID software.
What is the maximum supported RAM capacity?
The maximum supported RAM is 2TB using 128GB RDDR4 DIMMs across all slots.
How do I reset the BMC to factory defaults?
Power off the server, press and hold the ID button on the front panel for 10 seconds, or use the IPMI command 'ipmitool raw 0x30 0x40'.
Does the server support GPU installation?
The R163-S35 has limited PCIe slots. It can accommodate low-profile GPUs up to 75W (e.g., NVIDIA T4) in the x16 slot, but check power and thermal limits.
User questions about R163-S35 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual R163-S35 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R163-S35 by GIGABYTE.