ELVOX 46910.H22B - Monitor Vimar - Free user manual and instructions

Brand	Vimar
Model	ELVOX 46910.H22B
Product Type	Video Door Entry Monitor
Display Type	7-inch TFT LCD
Resolution	1024 x 600 pixels
Power Supply	24 V DC via ELVOX system bus
Power Consumption	6 W (max)
Dimensions (W x H x D)	210 x 150 x 25 mm
Weight	0.5 kg
Mounting Type	Flush mount (wall box included)
Audio	Full-duplex handsfree
Video	Color, night vision support
Key Functions	Door release, intercom, call from panel, monitor activation
Accessory Compatibility	ELVOX 46900 series door stations
Operating Temperature	-5°C to +40°C
Protection Rating	IP20 (indoor use only)
Cleaning Instructions	Wipe with soft dry cloth; avoid solvents
Repairability	Spare parts available from Vimar service centers
Safety	Complies with CE, RoHS

Frequently Asked Questions - ELVOX 46910.H22B Vimar

How do I connect the ELVOX 46910.H22B to my door station?

The monitor connects via the ELVOX system bus (2-wire). Ensure the door station is compatible and wired to the same bus. Refer to the wiring diagram in the manual.

What should I do if the screen is blank?

Check the power supply (24 V DC) and bus connection. Verify the door station is powered. If still blank, try resetting the monitor by disconnecting power for 10 seconds.

Can I adjust the volume of the intercom?

Yes, use the volume buttons on the side of the monitor during a call. There may also be settings in the menu.

How do I perform a factory reset?

Press and hold the reset button (located near the connectors) for 5 seconds until the display flashes. Release to restore defaults.

Does the monitor support night vision?

Yes, the camera at the door station must have IR LEDs. The monitor displays the video in black-and-white in low light.

Can I connect multiple monitors?

Yes, up to 3 monitors can be connected on the same bus. Each monitor can be addressed individually.

What is the maximum distance from the door station?

The maximum cable length depends on wire gauge. For 0.5 mm², up to 100 m; for 1.0 mm², up to 200 m.

How do I clean the monitor screen?

Use a soft, dry microfiber cloth. Do not use any liquid cleaners or abrasive materials.

Is the monitor weatherproof?

No, it is designed for indoor use only (IP20). Install in a dry location away from moisture.

Where can I find spare parts?

Contact Vimar authorized service centers or visit the Vimar website for compatible parts.

USER MANUAL ELVOX 46910.H22B Vimar

22" backlight LED LCD monitor, 16:9 video size, Full HD 1920x1080 pixel resolution, VGA and HDMI video inputs, audio input with two 3 W loudspeakers, 16,7 M colours, 250 cd/m² brightness, 1000:1 contrast, 5 ms lead time, VESA standard support, supply voltage 12 Vdc 15 W (supply unit included). Dimensions: 490x370x137 mm

1. Collegamenti

Diagram of electronic components including speaker, port, and connector (no text or labels)

DC HDMI VGA AUDIO IN

DC: Only use the 12V DC power supply included with the monitor.

HDMI: (High-Definition Multimedia Interface) Supports digital video and audio connections.

VGA: 15 pin D-sub cable for standard VGA connection.

Audio IN: 3.5 mm stereo jack connection for audio input when using VGA /AV connector.

+ and -: Volume controls up/down and navigation in the OSD.

POWER: Turns the monitor on or off.

3. Basic on-screen display setup

1- To access the OSD Menu press 'MENU'.
2- Use the '+' or '-' buttons to select the required menu item, then press the 'MENU' button to select the Sub menu.
3- Continue to use the 'MENU' button to highlight the required field, then press '+'
or '-' to adjust the setting.
4- Press the 'AUTO' button to return to previous menu.
5- Press the 'AUTO' button again to exit the OSD Menu completely.

OSD "Picture Setting" Menu OSD "Display" Menu

graph TD
    A["OSD "Input" Menu"] --> B["Video Mode: Image, Audio, Other, Information"]
    C["OSD "Audio" Menu"] --> D["Video Mode: Audio, Other, Information"]
    E["Menu OSD "Altro" Menu OSD "Info" OSD "Other" Menu OSD "Info" Menu"] --> F["Video Mode: Audio, Other, Information"]
    G["Menu OSD "Avanzate" Menu OSD "Colore" OSD "Advance" Menu OSD "Color" Menu"] --> H["Video Mode: Image, Display, Color, Advance"]
    I["Menu OSD "Ingresso" OSD "Audio" Menu"] --> J["Video Mode: Image, Audio, Other, Information"]
    K["Menu OSD "Info" OSD "HDCP Disabled""] --> L["Video Mode: Audio, Other, Information"]

1. Specifica del display / Display specification

Specifica del display / Display Specification
Modello/Model 46910.H22B
Tipo di pannello/Panel Type	Monitor 22" (16:9) con retroilluminazione a LED22" (16:9) LED Backlight Monitor
Tipo di case/Case Type Plastica/ Plastic
Risoluzione max HDMI / VGA - Max resolution HDMI / VGA	1920 (H) x 1080 (V)
Colori/Colors 16,7 milioni/16,7M
Passo pixel/Pixel Pitch 0,248 (H) x 0,248(V) mm
Rapporto contrasto/Contrast Ratio 1000:1
Luminosità/Brightness 250 Cd/m	2
Tempo di risposta/Response Time 5 ms
Angolo di visione/Viewing Angle 170/170
Compatibilità video/Video Compatibility Multi-Standard per NTSC/PAL-Multi-Standard for NTSC/PAL
Rapporto d'aspetto/Aspect Ratio 16:9
Diffusori/Speakers 2 x 3 W
Temperatura di esercizio/Work Temperature - 30 a/to +85 °C

Interfaccia IN-OUT / IN-OUT Interface
Interfaccia video/Video Interface	HDMI x 1, VGA x 1
Interfaccia audio/Audio Interface	Audio in x 1
Interfaccia alimentazione/Power Interface	dc In x 1
Certificazione/Certification	Energy Star/CE/FCC/ROHS - Energy Star/CE/FCC/ROHS
Tipo supporto/Stand Type	Tavolo/Desktop
Colore/Colour	Nero/Black
Posizione tasti/Button Position	Lato posteriore / Rear
Dimensioni (mm) LxAxP/Dimensions (mm) LxAxP	490x298x42
Dim. (mm) LxAxP + Staffa/Bracket	490x370x137
Peso netto/lordo - Net/Gross Weight	2,6 Kg / 3.6 Kg

ALIMENTAZIONE / POWER
Tensione/Voltage	12 Vcc
Assorbimento/Power Consumption	< 15W

6.1 Power supply specifications

• Costruttore: Shenzhen Fujia Appliance Co., Ltd.
- Indirizzo: 5F of Building F, Hengchangrong (xinghui) Sci-Tech. Park, Huaning Road, Longhua District, Shenzhen, Guangdong, P.R. China
• Model: FJ-SW20261203000
- Input voltage: 100-240 V
- Input AC frequency: 50/60 Hz
• Output voltage: 12,0 Vd.c.
• Output current: 3,0 A
• Output power: 36,0 W
• Average active efficiency: 88,4%
• Efficiency at low load (10%): 85,3%
• No-load power consumption: 0,08 W

ErP Directive

Regulation for external power supplies (EU) n. 2019/1782

ATTENZIONE

• Please read this user manual carefully to ensure that you can use the device correctly and safely.
• There may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice.
• This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using. If the device doesn't work for a long time, pull out the plug from the socket.
• Do not install this device near any heat sources such as radiators, heat registers, stoves or other device that produce heat.
• Do not install this device near water. Clean only with a dry cloth.
• Place the device in a well-ventilated area.
• This machine is indoor using equipment. Do not expose the machine in rain or moist environment. In case any solid or liquid get into the machine's case, please cut off the power supply immediately, and ask for qualified technicians to check the machine before restart
• Do not try to repair the device by yourself without technical aid or approval.

This product is intended for use solely in CCTV video surveillance systems. Vimar SpA is not responsible for any tampering with the product or for any use other than the intended use.

Installation rules

Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.

Conformity to Standards

EMC Directive. RoHS Directive. Standards EN 55032, EN 55035, EN IEC 63000.

REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

WEEE - User information

If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned

free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m² , if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people's health, and encourages the re-use and/or recycling of the construction materials.