ELVOX 46910.43K - Monitor Vimar - Free user manual and instructions

Product Type	Monitor
Brand	Vimar
Model	ELVOX 46910.43K
Power Supply	AC 110-240 V ~50/60 Hz
Video Inputs	HDMI, DisplayPort, VGA, DVI-D
Audio Output	3.5 mm headphone/speaker jack
Control Buttons	Power, Source, Menu, +/- (volume/OSD navigation)
OSD Languages	Multi-language (English, etc.)
Dimensions (with stand)	Approximately 550 x 400 x 200 mm
Weight	Approximately 5.2 kg
VESA Mount Compatible	Yes, 100x100 mm
Standards Compliance	EN 62368-1, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 63000; RoHS, REACH
Safety Precautions	Keep away from heat sources; use specified power supply; avoid shock, vibration, heavy pressure
Cleaning	Use a soft, dry cloth; avoid liquids and harsh chemicals
Installation	Must be carried out by qualified personnel in compliance with local electrical regulations
Spare Parts & Repairability	Contact authorized service center for spare parts; no user-serviceable parts inside
Disposal (WEEE)	Do not dispose with household waste; recycle at designated collection points

Frequently Asked Questions - ELVOX 46910.43K Vimar

How do I turn on the monitor?

Press the power button located on the lower-right side of the panel. The button may have a power symbol.

What video sources can I connect?

The monitor supports HDMI, DisplayPort, VGA, and DVI-D inputs. Use the Source button to cycle through available inputs.

How do I adjust the brightness and contrast?

Press the Menu button to open the OSD. Use the +/- buttons to navigate to the picture settings, then press Source to enter. Adjust brightness and contrast as desired.

Can I mount this monitor on a wall?

Yes, it supports a standard VESA 100x100 mm mount. Ensure the wall mount is securely attached to a wall stud.

How do I clean the screen?

Turn off the monitor and unplug it. Use a soft, lint-free cloth slightly dampened with water (or a dedicated screen cleaner) to gently wipe the screen. Do not spray liquid directly on the screen.

What does the LED indicator mean?

A solid blue light indicates the monitor is on. A blinking or off light may indicate standby or no signal. Check the power cable and video connection.

Why is there no display on the screen?

Ensure the monitor is powered on and the video cable is securely connected. Press the Source button to select the correct input. If the issue persists, test with another device or cable.

How do I connect external speakers or headphones?

Use the 3.5 mm audio output jack on the back of the monitor to connect active speakers or headphones. The monitor's volume buttons control the audio level.

What should I do if the monitor is not turning on?

Check that the power cord is securely plugged into both the monitor and a working wall outlet. If using a power strip, ensure it is switched on. If the problem continues, contact technical support.

Is the monitor energy efficient?

The monitor complies with energy efficiency standards. To save power, enable the power management feature in the OSD or switch off the monitor when not in use.

USER MANUAL ELVOX 46910.43K Vimar

2. Explanation of connectors

AC: power supply AC 110-240 V \~50/60 Hz

HDMI: Lets you connect a device, with an HDMI output (High Definition Multimedia Interface)

DP: Connect a video output device with DP. Computer / Notebook.

AUDIO out: Connect external 3.5 mm headphones or active speakers.

3. Controls & Functions

3.1 Buttons on the lower-right part of the panel

You can use the side panel buttons of your monitor to operate many of the monitor's features.

• (Monitor): turn on the volume.
• (remote control): acts like the right arrow button and adjusts menu controls.
• (Monitor): turn down the volume.
• (remote control): acts like the left arrow button and adjusts menu controls.
  Turn on / off the monitor

3.2 How to use buttons

Use the buttons on the right side control panel to adjust the OSD

1 Turn on / off the monitor.
2 press SOURCE button to accesses the available video input signals, press + button to enter the video mode.
3 press MENU button then press +/- button move highlight icon.
4 Press SOURCE button to enter the submenu, then press +/- button corresponding to edit.
5 When you are satisfied with the setting ,press MENU button to return to the previous menu or exit.

1. OSD setup under VGA/DP1/2/HDMI1/2/DVI-D input mode

• Before operation, we strongly advise users to read this manual and keep it properly for using later.
• Please use the specified power supply to connect.
• Avoid from in correct operation, shock vibration, heavy pressing which can cause damage to product.
• Keep away from heat sources such as radiators, heat registers, stove., etc.
• This is product instructions not quality warranty. We may reserve the rights of amending the typographical errors, inconsistencies with the latest version, software upgrades and product improvements, interpretation and modification. These changes will be published in the latest version without special notification.

Installation rules

Installation should be carried out by qualified personnel in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.

Conformity to Standards

BT Directive. EMC Directive. RoHS Directive.

Standards EN 62368-1, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 63000

REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

WEEE - User information

The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its life must be collected separately from other waste. The user must therefore hand the equipment at the end of its life cycle over to the appropriate municipal centres for the differentiated collection of electrical and electronic waste. As an alternative to independent management, you can deliver the equipment you want to dispose of to the dealer when purchasing a new appliance of an equivalent type. You can also deliver electronic products to be disposed of that are smaller than 25 cm for free, with no obligation to purchase, to electronics retailers with a sales area of at least 400 m ² . Proper sorted waste collection for subsequent recycling, processing and environmentally conscious disposal of the old equipment helps to prevent any possible negative impact on the environment and human health while promoting the practice of reusing and/or recycling materials used in manufacture.