KM8611HTR - Tumble drier Profilo - Free user manual and instructions
Find the device manual for free KM8611HTR Profilo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Profilo |
| Model | KM8611HTR |
| Capacity (kg) | 8.0 |
| Drying Type | Condenser (Heat Pump) |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption (kWh) | 561 |
| Noise Level (dB(A)) | 65 |
| Height (cm) | 85 |
| Width (cm) | 60 |
| Depth (cm) | 60 |
| Weight (kg) | 42 |
| Power Consumption (W) | 2200 |
| Voltage (V) | 220-240 |
| Frequency (Hz) | 50 |
| Number of Programs | 15 |
| Reverse Tumbling | Yes |
| Anti-Crease Function | Yes |
| Delay Start (hours) | Up to 24 |
| Child Lock | Yes |
| Lint Filter Cleaning | After each cycle |
| Condenser Cleaning | Monthly |
| Water Drain | Built-in tank or direct drain |
| Spare Parts Availability | 7 years after model discontinuation |
Frequently Asked Questions - KM8611HTR Profilo
How do I clean the lint filter?
Open the door and pull out the lint filter located at the bottom of the door opening. Remove the lint by hand and rinse the filter under running water if necessary. Dry thoroughly and reinsert. Always clean the filter after each drying cycle.
How often should I clean the condenser?
The condenser unit should be cleaned at least once a month or when the Condenser Clean indicator light appears. Remove the lower cover, pull out the condenser, rinse it with water, and dry it before reinstalling.
What should I do if the dryer doesn't start?
Check if the power cord is plugged in, the door is fully closed, the lint filter is in place, and the water tank (if using tank) is not full. Also ensure the circuit breaker is not tripped. Press the Start/Pause button again.
Can I dry all types of fabrics?
Most fabrics are safe, but avoid drying items labeled Do not tumble dry, such as wool, silk, or items with plastic components. Use the appropriate program for delicates or synthetics.
How do I use the delayed start function?
Select your desired program, then press the Delay Start button repeatedly to set the delay in hours (up to 24). The display will show the remaining time. Press Start/Pause to confirm.
What does the Child Lock do?
Child Lock prevents unintended changes to the program or settings. Activate it by pressing and holding the Child Lock button for 3 seconds. A lock symbol appears on the display. Repeat to deactivate.
Why is the drying time longer than expected?
Longer drying times can result from overloading the drum, using a high spin speed in the washer, a dirty lint filter or condenser, or low ambient temperature. Reduce load size or clean filters.
How do I drain the water directly?
You can connect a hose to the water drain outlet at the back of the dryer. Remove the cap and attach a standard garden hose. Lead the hose to a floor drain or sink. Ensure it is not kinked.
What is the maximum load for each program?
The maximum capacity is 8 kg for cotton programs. For synthetics and delicates, reduce to 4 kg and 2 kg respectively. Overloading can affect drying performance.
How do I resolve error codes?
Common error codes: E1 (water tank full) – empty tank; E2 (condenser blocked) – clean condenser; E3 (drain hose blocked) – check hose. For other codes, contact service.
User questions about KM8611HTR Profilo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual KM8611HTR - Profilo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KM8611HTR by Profilo.