SWNVK-870904B-AU - Security Camera SWANN - Free user manual and instructions

Product Type	Security Camera
Brand	Swann
Model	SWNVK-870904B-AU
Video Resolution	1080p Full HD (1920 x 1080)
Field of View	90° diagonal
Night Vision	Up to 30m (100ft) with infrared LEDs
Motion Detection	Passive infrared (PIR) with adjustable sensitivity
Audio	Built-in microphone and speaker for two-way talk
Weatherproof Rating	IP66 – dust and water resistant
Power Supply	12V DC, 1A power adapter (included)
Dimensions (H x W x D)	7.0 x 7.0 x 15.0 cm (2.8 x 2.8 x 5.9 in)
Weight	300 g (10.6 oz)
Mounting	Wall or ceiling mount with included bracket
Connectivity	Wired Ethernet (RJ45) for video and power (PoE not supported)
Compatibility	Swann Security app (iOS/Android) and PC software
Storage	Supports microSD card up to 128 GB (not included)
Maintenance	Clean lens with dry microfiber cloth; check cables periodically
Safety	Low voltage device; install out of reach; use only supplied adapter
Spare Parts	Replacement power adapters and mounting kits available from Swann
Repairability	Customer replaceable microSD card; other repairs by authorized service

Frequently Asked Questions - SWNVK-870904B-AU SWANN

How do I set up the Swann SWNVK-870904B-AU security camera?

Connect the camera to your router via Ethernet cable, plug in the power adapter, and download the Swann Security app. Follow the in-app instructions to add the camera.

Can I use this camera outdoors?

Yes, the camera has an IP66 weatherproof rating, making it suitable for outdoor use in rain or dust.

Does the camera support night vision?

Yes, it features infrared night vision with a range of up to 30 meters (100 feet), providing clear black-and-white footage in complete darkness.

What is the maximum microSD card size supported?

The camera supports microSD cards up to 128 GB for local storage. Ensure the card is formatted to FAT32 or exFAT.

How do I enable motion detection alerts?

In the Swann Security app, go to camera settings, enable motion detection, and adjust sensitivity. You can set the alert type (push notification or email).

Can I talk through the camera?

Yes, the built-in microphone and speaker allow two-way audio communication via the app.

What is the field of view?

The camera has a 90° diagonal field of view, suitable for monitoring doorways, driveways, or rooms.

Why is my camera not connecting to the app?

Ensure the camera is powered and connected to the same network as your phone. Check the Ethernet cable and router settings. Restart the camera and app.

How do I reset the camera to factory settings?

Press and hold the reset button on the camera (usually near the cable) for 10 seconds until the LED blinks rapidly. The camera will reboot and be ready for setup.

Is this camera compatible with third-party software like Blue Iris?

This camera works best with Swann’s own software and app. For third-party integration, check RTSP support; the camera may act as an ONVIF device with limited compatibility.

USER MANUAL SWNVK-870904B-AU SWANN

For use with Swann 7090, 7200 and 7250 NVRs

Before you begin

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty validation. Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to Swann's repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third party modifications to any component or evidence of misuse or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to major failure.

FCC Verification

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Consult the dealer or an experienced radio/TV technician for help

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• These devices may not cause harmful interference, and
- These devices must accept any interference received, including interference that may cause undesired operation.

Important Note:

All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any camera for any purpose, it is the buyer's responsibility to be aware of all applicable laws and regulations that prohibit or limit the use of cameras and to comply with the applicable laws and regulations.

WARNING

Modifications not approved by the party responsible for compliance could void user's authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is fixed correctly and stable if fastened in place.
• Do not operate if wires and terminals are exposed.

About the Camera

Congratulations on your purchase of this Swann 3MP Network Video

Camera with Power Over Ethernet. You've made a fine choice for keeping a watchful eye over your home or business. The camera delivers brilliant and amazingly clear high definition images and videos in both day and nighttime conditions even in complete darkness. Designed in an elegant, unobtrusive weatherproof casing with an integrated 3-axis mounting bracket, the camera is versatile enough to be installed on walls and ceilings - indoors or outdoors and will be an excellent addition to your Swann POE NVR monitoring solution.

This instruction manual will walk you through the basics of installing and connecting your camera.

Installation and Connection

General Guidelines

• The internal components of the camera can be damaged by prolonged exposure to direct sunlight. Don't let direct sunlight into the lens!
• The camera gets great images when it's in the shade, looking at subjects that are well lit. Don't place the camera in bright light and have it facing shade or darkness.
• Bright light sources to the sides of, or behind the subject will interfere with your images.
• The camera's night vision will give well-exposed images if the area is dark. However, if there's a bright point source in the camera's view (a streetlight, car headlights or similar) then it might not engage night vision mode.
• Typically, the best view is obtained approximately 7ft (2m) to 10ft (3m) high, looking slightly downwards.
• The camera can be mounted to a wall or ceiling.

Weather & Tampering

The camera's casing is resistant to water, different weather conditions and tampering. It would take an overwhelming event of this kind to damage the housing of the camera (severe weather such as hurricanes or someone intentionally damaging the lens would be enough). However, the cable and connector are vulnerable and require protection.

Cable Management

For best results, run the cable inside a wall cavity or other protected enclosure, and ensure that the network cable connection is safely sealed away from rain, direct sunlight and potential vandals.

Connecting the Camera

IMPORTANT!

When connecting network cables:

- When plugging or unplugging the network cable, hold the plug portion of the cable. When unplugging, do not pull on the network cable but unplug while pressing down on the lock.

- Never place strain of any kind on the network cable connection. It's designed to clip into place to prevent slippage, but it won't support any weight and can be easily broken by a sharp tug. Exercise caution.

- Ensure that cables are sheltered from moisture, weather and sunlight. The network cable connection was designed and intended for indoor use with computer networking - while it's ideal for handling the massive data loads that network cameras require, it's not weatherproof.

- If you are installing the camera outside of your home, we highly recommend using waterproof tape to wrap the cable connection area between the camera's Network (LAN) port and the extension cable's Ethernet plug. Use as much as is necessary for the layer of tape to protect the connection. This will help prevent water or moisture from leaking into the cable which can cause the network cable connection to degrade over time or stop working.

- If you are cutting your own Ethernet cable, the supplied waterproof connector cover can be used to protect the your network cable connection especially in high moisture areas.

Mounting the Camera

The camera can be mounted onto a flat surface using screws. The surface must have sufficient strength to hold the camera. Materials such as hardwood, brick or masonry are good options, and we've included all the gear you'll need to mount it there (except the tools - sorry, you'll still need your own drill). You can mount the camera onto a metal surface, but you'll need to supply your own mounting hardware.

To mount the camera:

• Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws or attach the supplied mounting template on the surface. Then, using appropriate screws for the surface you're fixing the camera to, secure the camera into place.
• If you're mounting to a wooden surface, then screw the camera directly to the surface.
• If you're mounting to a masonry surface (bricks, concrete or similar) then you'll need to use the included wall plugs.

Adjusting the Camera Angle

• Loosening the locking ring will allow you to pan, tilt and rotate the camera.
• Remember to tighten the locking ring back securely to lock the camera's position in place after you've finished adjusting the viewing angle of the camera.

Adjusting the Camera Settings

• When the camera is connected to your NVR, it will be automatically detected and an IP address will be assigned to it. If the camera is not detected, check that you have the cable inserted correctly. Please consult the user manual included with your NVR for a detailed explanation of the options available.
• At the 'Menu' screen, click 'Record' then click 'Encoding' to change settings for resolution, frame rate and video quality.
• Please consult the user manual included with your NVR for a detailed explanation of the encoding options available.

Helpdesk / Technical Support Details

Swann Technical Support

All Countries E-mail: [e-mail]

Telephone Helpdesk

USA Toll Free1-800-627-2799

USA Parts & Warranty 1-800-627-2799

(M-F, 9am-5pm US PT)

AUSTRALIA 1300 138 324

NEW ZEALAND Toll Free 0800 479 266

UK 0203 027 0979

3MP

Antes de comenzar

Adjusting the Camera Settings