DCY 8502 XB1 - Tumble drier BEKO - Free user manual and instructions
Find the device manual for free DCY 8502 XB1 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Beko |
| Model | DCY 8502 XB1 |
| Installation Type | Freestanding |
| Drying Type | Condenser |
| Capacity | 8 kg |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 235 kWh |
| Dimensions (H x W x D) | 85 cm x 60 cm x 65 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz |
| Noise Level | 65 dB(A) |
| Number of Drying Programs | 15 |
| Sensor Drying | Yes |
| Anti-Crease Function | Yes |
| Delayed Start | Yes, up to 24 hours |
| Child Lock | Yes |
| Filter Cleaning Indicator | Yes |
| Condenser Self-Cleaning | Yes |
| Drum Material | Stainless Steel |
| Reversible Door | Yes |
| Accessories Included | User manual, drain hose |
Frequently Asked Questions - DCY 8502 XB1 BEKO
How do I clean the lint filter?
Open the door, pull up the lint filter located at the bottom of the door opening. Remove lint by hand or with a soft brush. Rinse under running water if necessary, dry thoroughly, and reinsert. Clean after every cycle.
What should I do if the dryer stops mid-cycle?
Check if the water tank is full (for condenser models) or if the lint filter is blocked. Ensure the power supply is stable and the door is properly closed. If problem persists, refer to the troubleshooting section of your manual.
Can I dry all types of fabrics?
No. Check the care labels on your garments. Avoid drying items with flammable substances (e.g., dry-cleaning solvents), foam rubber, or delicate fabrics like silk unless specific programs are selected.
How often should I clean the condenser?
The condenser should be cleaned every 3-6 months depending on usage. Use the self-cleaning function if available, or manually rinse the condenser unit with water and let it dry before reinserting.
Why does my dryer take longer than usual?
Possible reasons: overloaded drum, dirty filter or condenser, high ambient humidity, or selected program not matching the load. Reduce load size and ensure all components are clean.
Is the dryer energy efficient?
The Beko DCY 8502 XB1 has an energy efficiency class of A++, meaning it is very efficient. However, actual consumption depends on usage patterns and load size.
How do I use the delayed start function?
Select your drying program, then press the delay button repeatedly to set the desired delay in hours (up to 24). The dryer will start automatically so that the cycle ends at the set time.
What does the child lock do?
The child lock prevents children from accidentally changing the program or starting/stopping the dryer. To activate, press and hold the child lock button for 3 seconds. Repeat to deactivate.
Can I install the dryer in a cupboard?
Yes, but ensure adequate ventilation for condenser models. Leave a minimum clearance of 5 cm on all sides. Do not block the ventilation grilles at the front and back.
Where can I find spare parts?
Spare parts such as filters, drum belts, and heating elements are available from authorized Beko service centers or online retailers. Use only genuine parts to maintain safety and performance.
User questions about DCY 8502 XB1 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual DCY 8502 XB1 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCY 8502 XB1 by BEKO.