PC1 - Power Controller AMX - Free user manual and instructions

Product Type	Power Controller (Switched Outlet)
Model	PC1 (FG670)
Input Voltage	120 VAC
Maximum Load	1200 W
Number of Outlets	1 (Switched)
Weight	1 lb 12 oz (793 g)
Included Accessories	6 ft (1.83 m) power cord with 3-wire grounded plug
Control Interface	4-pin captive-wire connector for remote pushbuttons, switches, or relay contacts
Control Modes	Momentary/Latching, Discrete On/Off
DIP Switch Settings	4-position DIP switch for mode selection (Momentary, Latching, Discrete On/Off)
Rear Panel Connector Pinout	Pin 1: Ground Common, Pin 2: Channel 1 ON/OFF (Momentary) or ON (Discrete), Pin 4: OFF (Discrete)
Compatibility	Works with NXC-I/O10 input/output control card
Certifications	UL Listed E205789
Safety Features	Grounding type plug; do not modify. Use only with grounded outlets.
Mounting Options	AC-RK Rack Mount Kit (FG515) available separately

Frequently Asked Questions - PC1 AMX

What is the maximum power rating of the PC1?

The PC1 can handle up to 1200 watts of equipment power at 120 VAC.

How do I wire the remote control connector?

Use the 4-pin captive-wire connector on the rear panel. For momentary/latching mode, connect Pin 1 (ground) and Pin 2 for ON/OFF. For discrete mode, Pin 2 is ON and Pin 4 is OFF. Refer to the manual for full pinout.

How do I set the DIP switches for different modes?

The 4-position DIP switch on the front panel controls the operation mode. For default momentary, set all switches ON. For latching, set switches 1 and 2 OFF, 3 and 4 ON. For discrete ON/OFF, set switch 1 ON, 2 and 3 OFF, 4 ON.

Can I control the PC1 with a third-party system?

Yes, the PC1 can be controlled via remote pushbuttons, switches, or relay contacts connected to the 4-pin input. It is compatible with AMX NXC-I/O10 control cards.

What is the PC1 used for?

The PC1 is a power controller that provides one switched 120 VAC outlet for up to 1200 W, ideal for turning equipment on/off remotely or via automation systems.

Is the PC1 rack-mountable?

Yes, it can be mounted using the optional AC-RK Rack Mount Kit (FG515), sold separately.

What safety certifications does the PC1 have?

It is UL Listed under file E205789, ensuring compliance with safety standards.

Does the PC1 include a power cord?

Yes, it includes a 6-foot (1.83 m) power cord with a 3-wire grounded plug.

Can I use the PC1 with 240 VAC?

No, the PC1 is designed for 120 VAC only. Using it with higher voltage may damage the unit and void the warranty.

How do I reset the PC1?

The PC1 does not have a built-in reset button. Cycle power by unplugging the unit or using the remote control to toggle the outlet off and on.

USER MANUAL PC1 AMX

The PC1 power controller (FG670) provides one switched outlet for 120 VAC power control with up to 1200 W of equipment power (FIG. 1).

The PC1 provides one switched power socket for up to 1200 watts of equipment power. Note: The PC1 will work the NXC-I/O10 input/output control card.

Specifications

PC1 PRODUCT SPECIFICATIONS (CONT.)
Weight	1 lb, 12 oz (793 g)
Included Accessories	Power Cord - 6 ft. (1.83 m), with 3-wire grounded plug.
Other AMX Equipment	AC-RK Rack Mount Kit (FG515)
Certifications	UL Listed E205789

WARNING: To reduce the risk of electric shock, equipment has a grounding type plug that has a third (grounding) pin. This plug will only fit into a grounding type outlet. If the plug does not fit into the outlet, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Control Wiring

The 4-pin captive-wire connector on the rear panel provides wiring to remote pushbuttons, switches, or relay contacts. The tables below list momentary/latching, and discrete on/off mode pinouts and functions.

Momentary/Latching Mode

Pin	Function
1	Unit Ground Input Contact Common
2	Channel 1 ON/OFF
3	N/C
4	N/C

Discrete On/Off Mode

Pin	Function
1	Unit Ground Input Contact Common
2	Channel 1 ON
3	N/C
4	Channel 1 OFF

DIP Switch Settings

The 4-position DIP Switch on the front panel is used to set the mode of operation for the AC1 (remote operation) pushbutton. The settings are shown below:

AC1 Momentary (Default)

Switch	Setting (Down = On)
1	ON	1 2 3 4↓ON
2	ON
3	ON
4	ON

AC1 Latching

Switch	Setting (Down = On)
1	OFF	1 2 3 4ON
2	OFF
3	ON
4	ON

Discrete ON/OFF

Switch	Setting (Down = On)
1	ON	1 2 3 4
2	OFF
3	OFF
4	ON