PIR725 - Motion detector FIRST ALERT - Free user manual and instructions

Product Type	Motion Detector
Brand	First Alert
Model	PIR725
Detection Technology	Passive Infrared (PIR)
Detection Range	Up to 40 ft (12 m)
Detection Angle	90°
Power Supply	9V DC battery (included)
Dimensions (H x W x D)	4.5 x 2.8 x 1.6 in (114 x 71 x 41 mm)
Weight	3.2 oz (91 g)
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	5% to 95% non-condensing
Mounting	Wall mount, bracket included
Key Functions	Motion detection, adjustable sensitivity, LED indicator, tamper-proof design
Care and Cleaning	Wipe with dry cloth; avoid water or cleaning fluids
Safety Features	Low battery indicator, false alarm reduction
Replacement Parts / Repairability	User replaceable battery only; no other serviceable parts
General Information	Indoor use only, UL listed

Frequently Asked Questions - PIR725 FIRST ALERT

How do I install the PIR725 motion detector?

Mount the detector on a wall 6-8 ft high using the included bracket. Ensure it has a clear view of the area to monitor. Insert the battery and follow setup instructions.

What type of battery does the PIR725 use?

It uses one 9V alkaline battery. A fresh battery typically lasts up to one year.

How can I adjust the sensitivity?

Use the sensitivity dial on the back of the detector. Turn clockwise for higher sensitivity (larger detection area) or counterclockwise for lower.

Why is the LED blinking?

A blinking LED indicates motion detection. If it blinks continuously without motion, check for false triggers or a weak battery.

How do I reset the detector?

Remove the battery for 10 seconds, then reinstall. This clears any memory and restarts the detector.

Can I use the PIR725 outdoors?

No, it is designed for indoor use only. Exposure to weather may damage the unit.

What is the detection range?

The PIR725 detects motion up to 40 feet (12 meters) away with a 90° field of view.

How do I test if the detector is working?

Walk across the detection area while observing the LED. The LED should flash each time motion is detected.

How do I replace the battery?

Remove the detector cover, disconnect the old 9V battery, and connect a new one. Ensure correct polarity. Replace the cover.

What does the tamper switch do?

The tamper switch triggers an alarm if the cover is forcibly removed, enhancing security against tampering.

USER MANUAL PIR725 FIRST ALERT

Illustration of a stylized conical lamp with black and white striped pattern (no text or symbols)

120VAC, 60 Hz, 100W Max.

Model
PIR 725

US Patent D320,595

© 2009 BRK Brands, Inc. All rights reserved.

M08-0222-000 10/09

IMPORTANT! PLEASE READ CAREFULLY AND SAVE.

This user's manual contains important information about your Motion Sensing Hands Free Socket's operation. If you are installing this unit for use by others, you must leave this manual—or a copy of it—with the end user.

Distributed by BRK Brands, Inc., Aurora, IL 60504-8122

Consumer Affairs: Monday-Friday, 7:30am-5pm (Central Time): [phone]. Internet: www.firstalert.com

The First Alert ^® Motion Sensing Hands Free Socket senses your approach and automatically turns on the light. The light remains on as long as the motion sensor detects activity in the room, turning the light off approximately 4 minutes after you leave the area.

The Motion Sensing Hands Free Socket is ideal for walk-in closets, laundry room, utility room or basement. It offers the convenience of automatic lighting where you might otherwise have to search for a wall switch or pull string. Use the Motion Sensing Hands Free Socket in any area or room that is equipped with a ceiling-mounted, bare bulb light socket.

△CAUTION!

The motion sensor is not designed for use with an enclosed or shaded bulb of any kind. Use only with a ceiling-mounted, bare bulb light socket. DO NOT use with halogen bulbs.

SPECIAL FEATURES

The Motion Sensing Hands Free Socket:

• Detects motion in all directions—approximately 360°.
• Senses activity at a distance of 12 feet (when mounted at a height of 8 feet above the floor).
• Turns the light off automatically approximately 4 minutes after movement in the area stops.
• Works in full daylight, in darkness, and at any light level in between.
• Uses a standard incandescent bulb up to 100 watts or a compact fluorescent bulb up to 50 watts.

WHERE TO MOUNT THE UNIT

Be sure the socket selected is at least 12 inches from any wall or door. Choose any ceiling-mounted, bare bulb light socket. Mounted at a height of 8 feet, the Motion Sensing Hands Free Socket will sense the approach of a person five feet tall at a distance of 12 feet. If the Motion Sensing Hands Free Socket is mounted higher than 8 feet, it will "see" somewhat farther. If it is

mounted lower than 8 feet, it will not "see" quite as far. Do not mount the Motion Sensing Hands Free Socket higher than 10 feet from the floor.

LIMITATIONS OF MOTION SENSING HANDS FREE SOCKET

This Motion Sensing Hands Free Socket:

- Is for indoor use only.

- Requires AC power to function properly. If AC power to the unit is cut off, it will not work.

• Is NOT intended to serve as a safety or security device. It is designed for convenience only.

This Motion Sensing Hands Free Socket will not work properly if:

- The socket to which it is connected is defective or if the bulb is burned out.

- It is used with anything other than a ceiling-mounted, bare bulb light socket.

Although the Motion Sensing Hands Free Socket detects changes in temperature, it is not intended to be used as a heat and/or fire detector. Consult NFPA Standard 72, National Fire Alarm Code, for residential smoke detection and fire protection guidelines.

Although this Motion Sensing Hands Free Socket detects motion 380°, the unit responds more effectively at each 180° point. (See figure right.) The 180° points are marked on the top of the unit by arrows. After installing the unit, rotate it until either arrow faces the general direction of the path people will most likely cross.

In hot temperature environments over 90 degrees Fahrenheit, use a maximum 75W bulb.

△WARNING!

This device is designed for INDOOR USE ONLY. Do not allow it to get wet.

△CAUTION!

Infrared cannot penetrate glass or plastic. Do not use in a glass-enclosed light or shaded lamp. USE ONLY WITH A CEILING-MOUNTED, BARE BULB LIGHT SOCKET.

INSTALLING THE MOTION SENSOR

⚠ WARNING!

Never touch the Motion Sensing Hands Free Socket, bulb, or socket with wet hands or when the floor is damp or wet.

ACAUTION!

Turn the light OFF when installing the unit.

1. Turn the power to the light socket you have chosen OFF.

2. Remove the light bulb from the socket.

3. Screw the Motion Sensing Hands Free Socket directly into the empty socket.

4. Screw the light bulb into the Motion Sensing Hands Free Socket.

5. Turn the power ON. After several seconds, the light will turn on. The light will remain on for approximately 4 minutes after you leave the area. (A built-in delay of several seconds allows the light bulb to cool before the motion sensor is able to detect motion again.)

The unit is now ready to operate automatically.

A CAUTION!

It is possible that the light may turn off while you are within the sensing area. For example, you may have been standing still.

TROUBLESHOOTING

CONSUMER AFFAIRS 1-800-323-9005

The lights do not turn on 1. Bulb is burned out

when movement is detected 2. Power switch is OFF 3. Rotate directional alignment arrows 4. Bulb waltage may be too low

The lights lum on and off 1. Bulb is more than 100 watts repeatedly 2. Motion Sensing Hands Free Socket must be mounted at least 12 inches from any wall or door 3. Heat sources in target area

The light slays on 1. Bulb is more than 100 watts continuously 2. Motion Sensing Hands Free Socket must be mounted at least 12 inches from any wall or door 3. Heat sources in target area

1. Temporary power failure—turn light off and on again

Sensing range is reduced 1. Very warm temperatures can temporarily reduce the sensing range of the Motion Sensing Hands Free Rocket

NOTE: If the Motion Sensing Hands Free Socket is less than 12 inches away from a door or wall, reduce bulb wattage or apply masking or electrical tape over a portion of the sensor lens in direct line with the wall or door to reduce reflection.

CLEANING AND REPAIRING

To clean the Motion Sensing Hands Free Socket:

1. Tum the light OFF.

2. Remove the Motion Sensing Hands Free Socket and bulb from the light socket.

3. Wipe the unit with a soft cloth. Do not use harsh cleaners of any kind. Do not allow the unit to get wet or be submerged in water.

A WARNING!

Never touch the Motion Sensing Hands Free Socket, bulb, or socket with wet hands or when the floor is damp or wet.

WARNING!

Always turn the light OFF when cleaning.

Do not attempt to repair your Motion Sensing Hands Free Socket yourself. If it does not appear to be working properly and it is still under warranty, return it to BRK Brands, Inc. If the unit is no longer under warranty, please discard it and replace it with a new unit.

LIMITED WARRANTY

Coverage: BRK Brands, Inc. warrants its enclosed Motion Sensing Hands Free Socket to be free from defects in materials and workmanship under normal use for a period of three years from the date of purchase. During the first year after the date of purchase, BRK Brands, Inc. will replace any defective Motion Sensing Hands Free Socket without charge. During the next two years, BRK Brands, Inc. will replace any defective Motion Sensing Hands Free Socket at a charge to you not to exceed BRK Brands, Inc.'s cost. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, Proof of purchase is required to obtain warranty performance, Dealers, service centers, or retail stores selling this product do not have the right to alter, modify or any way change the terms and conditions of this warranty. In new construction, if your Motion Sensing Hands Free Sockets were installed by a contractor, this warranty is valid for the homeowner at the time of installation from the date of original installation and is not transferable.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, or use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK Brands, Inc. Further, the warranty does not cover acts of God, such as fire, flood, hurricanes and tornadoes.

BRK Brands, Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration for 3 years. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limits may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, or province to province.

Service: Units that are under warranty and require service, please contact the Consumer Affairs Department [phone], Mon-Fri, 7:30am-5:00pm CST First Alert ^1 is a registered trademark of The First Alert Trust.

Made in China