SP6 Series RSP630IN - Heating Rinnai - Free user manual and instructions
Find the device manual for free SP6 Series RSP630IN Rinnai in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Rinnai |
| Model | SP6 Series RSP630IN |
| Product Type | Gas Space Heater |
| Fuel Type | Natural Gas / LPG (convertible) |
| Heat Output | 6.5 kW (22,000 BTU/h) |
| Efficiency | >90% (condensing) |
| Dimensions (H x W x D) | 610 mm x 410 mm x 220 mm |
| Weight | 8.2 kg |
| Operation | Electronic ignition with thermostat control |
| Safety Features | Flame failure device, oxygen depletion sensor, tip-over switch |
| Venting | Balanced flue (direct vent) – suitable for room-sealed installation |
| Power Supply | 220-240 V ~ 50 Hz (for fan and ignition) |
| Energy Class | A |
| Noise Level | < 35 dB(A) |
| Gas Connection | G 1/2" BSP (rear or side entry) |
| Certification | CE, UKCA, EcoDesign compliant |
| Cleaning & Maintenance | Wipe with damp cloth; annual service recommended by qualified technician |
| Spare Parts Availability | Genuine Rinnai parts via authorized dealers (7-10 year support) |
| Warranty | 2 years (parts & labor) – extended options available |
Frequently Asked Questions - SP6 Series RSP630IN Rinnai
Can I convert the heater from natural gas to LPG?
Yes, the SP6 Series RSP630IN is convertible. A conversion kit (available from Rinnai) must be installed by a qualified gas technician. Never attempt conversion yourself.
How do I clean the heater?
Turn off the heater and let it cool. Wipe the exterior with a soft damp cloth and mild detergent. Do not use abrasive cleaners. The internal components should be serviced annually by a professional.
What does the error code 'E1' mean?
Error E1 indicates a flame detection failure. Check if the gas supply is on, the pilot is lit, and the thermocouple is clean. If the problem persists, call a service technician.
Does the heater have a remote control?
This model comes with a wired thermostat as standard. A wireless remote control kit (RCS-5) can be purchased separately for added convenience.
What is the minimum clearance from combustible materials?
Maintain at least 500 mm from the top, 200 mm from sides, and 200 mm from the front. Always follow the installation instructions in the manual.
How do I relight the pilot?
Turn the gas control knob to 'Pilot', press and hold it down. Use the ignition button (or a long lighter) to light the pilot. Keep the knob depressed for 30 seconds after lighting.
Can I use the heater in a bathroom?
No, this heater is not rated for damp locations. It must be installed in a dry, well-ventilated room, away from water sources.
Why does the heater turn off unexpectedly?
Possible causes: oxygen depletion sensor triggered (low oxygen), blocked flue, or overheating. Ensure the room has adequate ventilation and the heater is not obstructed.
How often should I service the heater?
Rinnai recommends an annual service by a certified gas engineer. This includes cleaning the burner, checking gas pressure, and testing safety devices.
Is the heater suitable for high altitude?
This standard model is designed for altitudes up to 2000 m. For higher altitudes, a specific adjustment kit is required. Consult Rinnai support.
User questions about SP6 Series RSP630IN Rinnai
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual SP6 Series RSP630IN - Rinnai and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP6 Series RSP630IN by Rinnai.