HL-2130R - Printer BROTHER - Free user manual and instructions
Find the device manual for free HL-2130R BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Printer |
| Brand | Brother |
| Model | HL-2130R |
| Print Technology | Laser |
| Print Speed (A4) | Up to 20 ppm |
| Print Resolution | Up to 2400 x 600 dpi |
| Paper Input Capacity | 250 sheets (standard tray) |
| Paper Output Capacity | 100 sheets face-down |
| Media Sizes Supported | A4, Letter, Legal, Executive, A5, A6 |
| Interface | USB 2.0 |
| Dimensions (W x D x H) | 358 x 197 x 208 mm |
| Weight | 4.9 kg |
| Power Consumption (Printing) | Approx. 390 W |
| Power Consumption (Standby) | Approx. 55 W |
| Power Supply | AC 220-240V, 50/60 Hz |
| Operating Systems Supported | Windows, macOS, Linux |
| Monthly Duty Cycle | Up to 10,000 pages |
| Maintenance | Replace toner and drum unit as needed; clean corona wire |
| Safety Features | Auto shut-off; covers interlock |
| Spare Parts & Repairability | Replacement toner (TN-450), drum (DR-450); user-replaceable |
Frequently Asked Questions - HL-2130R BROTHER
How do I install the toner cartridge in the Brother HL-2130R?
Open the front cover by pulling the release lever. Remove the toner and drum unit assembly. Press the green lever and pull out the old toner if present. Unpack the new toner cartridge and shake it gently. Insert it into the drum unit until it clicks. Reinstall the assembly and close the cover.
How can I clear a paper jam on the HL-2130R?
Turn off the printer and open the front cover. If the jam is in the fuser area, gently pull the paper towards you. Check the manual feed slot and output tray. Avoid tearing the paper. After clearing, close the cover and turn the printer back on. If the error persists, check the paper jam sensor.
How do I connect the Brother HL-2130R to my computer?
Use a USB 2.0 cable (A/B type). Connect one end to the printer and the other to your computer. Turn on the printer. Windows/macOS should detect it automatically. If not, download the driver from Brother's support site and install it. The HL-2130R does not support network or wireless connections.
What type of toner does the HL-2130R use?
The HL-2130R uses the Brother TN-450 high-yield toner cartridge (approx. 2,600 pages) or the TN-420 standard-yield (approx. 1,200 pages). It also uses the DR-450 drum unit (approx. 12,000 pages). Check the machine's label for compatible consumables.
How do I clean the corona wire of the HL-2130R?
Turn off and unplug the printer. Open the front cover and remove the toner and drum unit. Locate the green corona wire cleaning tab on the drum unit. Slide it left and right several times to clean the wire. Return the tab to its original position. Reinstall the assembly and close the cover.
The printer prints blank pages. What should I do?
Ensure the toner cartridge is not empty and properly installed. Check if the protective seal has been removed from the cartridge. Try printing a test page via the printer driver. If the issue persists, clean the corona wire and check the drum unit for damage.
How do I reset the drum counter on the HL-2130R?
After replacing the drum unit, you need to reset the drum counter. Turn on the printer. Press the Go button (or compatible) for about 4 seconds until all LEDs light up, then release. The drum counter resets automatically. Confirm with a test print.
Why is my HL-2130R printing vertical streaks?
Vertical streaks often indicate a dirty corona wire or a damaged drum. Clean the corona wire using the cleaning tab. If streaks persist, replace the drum unit. Also check for toner spills on the paper path.
Can I print on both sides (duplex) automatically?
No, the HL-2130R does not have built-in duplex printing. To print on both sides, you must manually flip the pages and feed them again, or enable manual duplex in the printer driver settings. The printer will prompt you when to reinsert the paper.
How do I perform a factory reset on the HL-2130R?
Turn off the printer. Press and hold the Go button while turning on the power. Keep holding until the Ready LED turns on, then release. All LEDs will flash. Press the Go button again to reset to factory defaults. The printer will restart.
User questions about HL-2130R BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual HL-2130R - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL-2130R by BROTHER.