SC 1 - Camera Pentacon - Free user manual and instructions
Find the device manual for free SC 1 Pentacon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 35mm SLR Camera |
| Brand | Pentacon |
| Model | SC 1 |
| Image Format | 35mm (24x36mm) |
| Lens Mount | M42 screw thread |
| Shutter Type | Focal-plane shutter |
| Shutter Speeds | B, 1 to 1/1000 sec |
| Exposure Meter | Through-the-lens (TTL) metering with CdS cell |
| Exposure Modes | Manual |
| Viewfinder | Pentaprism with microprism focus screen |
| Film Advance | Lever, single stroke |
| Dimensions (approx.) | 140 x 90 x 50 mm |
| Weight (approx.) | 500 g |
| Power Source | No internal battery (mechanical camera) |
| Flash Sync | Hot shoe and PC sync socket; sync at 1/60 sec |
| Self-Timer | Mechanical, approx. 10 sec delay |
| Film Speed Range | ASA 12 to 1600 (with meter) |
| Maintenance | Keep in dry place; clean lens with microfiber cloth |
| Safety Precautions | Do not point lens at sun; store with lens cap |
| Spare Parts & Repairability | Lenses and accessories available via M42 mount; service by camera specialist |
| General Information | Made by Pentacon, Dresden, former East Germany |
Frequently Asked Questions - SC 1 Pentacon
How do I load film into the Pentacon SC 1?
Open the back by pulling up the rewind knob. Insert a 35mm film cassette into the left chamber, pull the film leader across to the take-up spool, and ensure the sprocket holes engage with the sprocket teeth. Close the back and advance the film using the lever until frame 1 is reached.
What battery does the Pentacon SC 1 use?
The Pentacon SC 1 is a mechanical camera and does not require any battery for shutter operation. The light meter, if present, uses a mercury battery (PX625) or modern equivalent (LR44 with adapter).
How do I set the shutter speed?
Rotate the shutter speed dial located on the top plate. The dial has settings from B (bulb), 1, 2, 4, 8, 15, 30, 60, 125, 250, 500, and 1000. Align the desired speed with the index mark.
Is the lens interchangeable?
Yes, the Pentacon SC 1 uses the M42 screw mount (42mm thread diameter), allowing compatibility with a wide range of lenses from Pentacon, Carl Zeiss Jena, and other manufacturers.
How do I use the self-timer?
The self-timer lever is located on the front of the camera. Turn it downward (or as indicated in the manual) to cock it. Then press the shutter release; the shutter will fire after approximately 10 seconds.
What flash sync speed should I use?
The flash sync speed is 1/60 second. Use a slower speed or bulb mode for safe synchronization. The camera has a hot shoe and a PC sync socket.
How do I rewind the film?
Press the film rewind button (located on the bottom plate). Then turn the rewind knob clockwise until resistance is felt. Open the back to remove the cassette.
Why is my light meter not working?
The light meter requires a working battery (PX625 or LR44 with adapter). If the meter needle does not move, check the battery connection. Also ensure the film speed is set correctly.
Can I use modern film with this camera?
Yes, the camera accepts standard 35mm film (ISO 100-400 recommended for best results). Adjust the ASA dial according to your film's speed.
How do I clean the lens?
Use a soft microfiber cloth or lens brush to remove dust. For smudges, apply a small amount of lens cleaning solution to the cloth and gently wipe in a circular motion. Avoid touching the glass with fingers.
User questions about SC 1 Pentacon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual SC 1 - Pentacon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC 1 by Pentacon.
