Glo-Ray GRSDS-36T - Warming tray Hatco - Free user manual and instructions
Find the device manual for free Glo-Ray GRSDS-36T Hatco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hatco |
| Model | Glo-Ray GRSDS-36T |
| Product Type | Warming Tray |
| Width | 36 inches (91.4 cm) |
| Depth | 18 inches (45.7 cm) |
| Height | 6 inches (15.2 cm) |
| Weight | Approximately 50 lbs (22.7 kg) |
| Power Supply | 120V, 60Hz, 1-phase |
| Wattage | 1500W |
| Temperature Range | Low to High (adjustable thermostat) |
| Construction Material | Stainless steel |
| Heating Element | Infrared quartz |
| Controls | Infinite heat switch |
| Power Cord | 6 ft (1.8 m) with plug |
| Safety Features | Heavy-duty steel construction, stable base |
| Cleaning | Wipe with damp cloth; do not immerse |
| Intended Use | Commercial food warming |
| Certifications | NSF, UL |
Frequently Asked Questions - Glo-Ray GRSDS-36T Hatco
What is the power requirement for the Hatco Glo-Ray GRSDS-36T?
The unit requires a 120V, 60Hz, 1-phase electrical supply and draws approximately 1500W.
Can I place metal pans directly on the warming tray?
Yes, the stainless steel surface is designed for direct contact with metal pans. Avoid using damaged or warped pans that may scratch the surface.
How do I adjust the temperature?
Turn the infinite heat switch to the desired setting. There is no specific temperature marking; adjust based on the heat output.
How should I clean the warming tray?
After unplugging and allowing to cool, wipe the surface with a damp cloth. Do not use abrasive cleaners or immerse the unit in water.
What is the maximum weight capacity?
The tray can typically hold up to 50 lbs evenly distributed. Avoid placing excessive weight on one spot.
Can I use this warming tray outdoors?
No, this unit is intended for indoor commercial use only. Exposure to moisture may cause electrical hazards.
Does the unit have an auto shut-off?
No, the Hatco Glo-Ray GRSDS-36T does not have an automatic shut-off. It must be manually turned off when not in use.
What is the warranty period?
Hatco offers a one-year warranty on parts and labor. Check your purchase documentation for details.
Can I replace the power cord if damaged?
The power cord is not user-serviceable. Contact a qualified technician or Hatco service center for replacement.
How long does it take to heat up?
The infrared quartz heating element reaches operating temperature within 5-10 minutes.
User questions about Glo-Ray GRSDS-36T Hatco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Warming tray in PDF format for free! Find your manual Glo-Ray GRSDS-36T - Hatco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Glo-Ray GRSDS-36T by Hatco.