TEG5310P - Network switch Tenda - Free user manual and instructions
Find the device manual for free TEG5310P Tenda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 5-Port Gigabit PoE+ Switch |
| Model | TEG5310P |
| Brand | Tenda |
| Ports | 5 x 10/100/1000 Mbps (Port 1-4 support PoE+; Port 5 uplink) |
| PoE Standard | IEEE 802.3af/at |
| PoE Budget | 60W total, up to 30W per port |
| Switching Capacity | 10 Gbps |
| Forwarding Rate | 7.44 Mpps |
| MAC Address Table | 2K |
| Dimensions (W x D x H) | 100 x 70 x 26 mm (3.9 x 2.8 x 1.0 in) |
| Weight | 0.2 kg (0.44 lbs) |
| Power Supply | External adapter, 48V DC, 1.25A |
| Power Consumption | < 65W (with PoE load) |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Link/Activity per port, PoE status |
| Network Protocols | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3af/at |
| Advanced Features | Auto MDI/MDIX, store-and-forward, flow control, VLAN |
| Chassis Material | Metal |
| Mounting | Desktop, wall-mountable (brackets included) |
| Safety Certifications | CE, FCC, RoHS |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use liquids or solvents |
| Spare Parts / Repairability | No user-serviceable parts; contact Tenda support for repairs |
| Package Contents | Switch, power adapter, user manual, wall-mount kit, rubber feet |
Frequently Asked Questions - TEG5310P Tenda
How do I reset the TEG5310P to factory defaults?
Press and hold the reset button on the front panel for about 5 seconds until all LEDs flash, then release. The switch will reboot with default settings.
What is the default IP address of the TEG5310P?
The TEG5310P is an unmanaged switch, so it does not have a configurable IP address. It works plug-and-play without network configuration.
Can I power devices with 30W on each PoE port?
Yes, each PoE port can provide up to 30W (IEEE 802.3at), but the total PoE budget is 60W. Ensure all connected devices draw less than 60W combined.
Does the switch support VLAN?
The TEG5310P is an unmanaged switch and does not support VLAN configuration. It forwards all frames based on MAC addresses.
How to mount the TEG5310P on a wall?
Use the included wall-mount brackets and screws. Attach brackets to the switch, mark holes on the wall, drill, insert anchors, and screw the brackets.
What is the PoE pinout on the Ethernet ports?
PoE uses pins 1,2 (+V) and 3,6 (-V) for Power over Ethernet, compliant with Mode A (end-span). Data and power are on the same pairs.
Can I connect a non-PoE device to a PoE port?
Yes, the switch automatically detects if the connected device requires PoE and only supplies power if needed. Non-PoE devices work normally.
The switch is not powering my PoE device. What should I check?
First, verify the total PoE power draw is within 60W. Check cable integrity (Cat5e or better). Ensure the powered device supports 802.3af/at. Try a different port.
What is the switching capacity of the TEG5310P?
The switching capacity is 10 Gbps, calculated as (number of ports) x (port speed) x 2 = 5 x 1 Gbps x 2 = 10 Gbps.
How to clean the switch?
Power off the switch first. Use a dry, lint-free cloth to wipe the exterior. Do not use any liquids, alcohol, or cleaning agents.
User questions about TEG5310P Tenda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual TEG5310P - Tenda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TEG5310P by Tenda.