Elite 73312 - Fridge KENMORE - Free user manual and instructions
Find the device manual for free Elite 73312 KENMORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | French Door Refrigerator |
| Brand | Kenmore |
| Model | Elite 73312 |
| Total Capacity | 25.0 cu ft |
| Refrigerator Capacity | 16.5 cu ft |
| Freezer Capacity | 8.5 cu ft |
| Dimensions (W x H x D) | 35.6" x 69.5" x 33.2" |
| Weight | 310 lbs |
| Power Supply | 120 V, 60 Hz, 15 A |
| Annual Energy Consumption | 635 kWh |
| Energy Star Certified | Yes |
| Ice Maker | Built-in, produces up to 3 lbs per day |
| Water Filter | Kenmore 9081, replaces every 6 months |
| Temperature Control | Electronic digital display with separate fridge and freezer controls |
| Shelving | Adjustable spill-proof glass shelves |
| Door Style | French doors with bottom freezer drawer |
| Drawers | Humidity-controlled crisper drawers |
| Defrost | Automatic defrost in both compartments |
| Leveling Legs | Yes, adjustable front leveling legs |
| Reversible Doors | No, doors are not reversible |
Frequently Asked Questions - Elite 73312 KENMORE
How do I set the temperature on my Kenmore Elite 73312 refrigerator?
Use the electronic control panel inside the fridge compartment. Press the Fridge or Freezer button and then adjust using the up/down arrows. Recommended setting: 37°F (3°C) for fridge, 0°F (-18°C) for freezer.
How often should I replace the water filter?
Replace the Kenmore 9081 water filter every 6 months or when the filter indicator light turns red. Follow the instructions in the manual for installation.
Why is my ice maker not producing ice?
Check that the ice maker is turned on, the water supply is connected and the water valve is open. Also ensure the freezer temperature is at or below 0°F (-18°C). If the issue persists, consult the troubleshooting section.
Can I reverse the doors on my Kenmore Elite 73312?
No, the doors on this model are not reversible. They are designed for a specific configuration.
What are the dimensions and clearance requirements for installation?
Dimensions: 35.6" W x 69.5" H x 33.2" D. Allow at least 1" clearance on the sides, 2" behind, and 0.5" above for proper ventilation.
How do I clean the condenser coils?
Unplug the refrigerator. Remove the front kickplate. Use a vacuum with a brush attachment to gently clean the coils. Reattach the kickplate and plug the unit back in. Do this every 6-12 months.
What should I do if the door alarm is sounding?
The door alarm sounds if a door is left open for more than 2 minutes. Close all doors securely. If the alarm continues, check that door seals are clean and unobstructed.
How do I change the light bulb in the refrigerator?
The Kenmore Elite 73312 uses LED lighting. The LEDs are not user-serviceable. Contact a qualified technician if the lights fail.
Why is my refrigerator not cooling enough?
Ensure the temperature settings are correct, doors are fully closed and seals are intact. Check for blocked vents and clean the condenser coils. Allow 24 hours for temperature to stabilize after adjustments.
Where can I find the model and serial number?
The model and serial number are located on a label inside the refrigerator compartment, on the upper left wall. This information is needed for service or parts ordering.
User questions about Elite 73312 KENMORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual Elite 73312 - KENMORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Elite 73312 by KENMORE.