ABY Pro Selector - Effect pedal Morley - Free user manual and instructions
Find the device manual for free ABY Pro Selector Morley in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effect Pedal (ABY Selector) |
| Brand | Morley |
| Model | ABY Pro Selector |
| Dimensions | 4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm) |
| Weight | 0.5 lb (227 g) |
| Power Supply | 9V DC (center negative) or 9V battery |
| Current Draw | Typically less than 10 mA (passive operation) |
| Inputs | 1 x 1/4" instrument input |
| Outputs | 2 x 1/4" (A and B) or 1 x 1/4" (Y - combine) |
| Switching Modes | A, B, or Y (both) via footswitch |
| Ground Lift | Yes, switchable to reduce hum |
| Phase Invert | Not included (basic model) |
| True Bypass | Yes, passive circuit for signal integrity |
| Construction | Metal chassis with rugged footswitch |
| LED Indicators | For active output selection |
| Compatibility | Works with guitar, bass, and line-level signals |
| Cleaning | Wipe with dry cloth; avoid solvents |
| Repair | No user-serviceable parts; contact Morley or authorized service |
Frequently Asked Questions - ABY Pro Selector Morley
What is the Morley ABY Pro Selector used for?
It is an ABY pedal that allows you to switch between two amplifiers (A or B) or combine them (Y) for a bigger sound. It can also be used to select between two instruments.
Does the ABY Pro Selector require power?
It can operate passively without power, but using a 9V battery or DC adapter may be required for LED indicators and ground lift functionality.
Can I use the ABY Pro Selector with active pickups?
Yes, it works with both active and passive pickups. No impedance issues.
How do I connect the pedal to two amps?
Plug your instrument into the Input jack. Connect Output A to one amp and Output B to the other. Use the footswitch to select A, B, or Y.
What is the ground lift switch for?
The ground lift disconnects the ground connection between the two outputs, reducing hum and ground loop noise when using two amplifiers.
Is the Morley ABY Pro Selector true bypass?
Yes, it features true bypass with passive switching, ensuring no signal degradation when the pedal is not in use.
Can I use the Y mode to combine two signals into one amp?
Yes, in Y mode, the pedal combines both inputs (if using two instruments) or outputs to a single amp. Note that this may cause phase cancellation if instruments are out of phase.
How do I clean and maintain the pedal?
Wipe the surface with a dry, lint-free cloth. Do not use chemical cleaners. Avoid moisture and extreme temperatures.
What type of power adapter should I use?
Use a standard 9V DC adapter with center negative polarity (2.1mm barrel). Current draw is very low; any adapter rated at least 100mA will work.
Is the pedal compatible with line-level signals?
Yes, it can handle both instrument-level and line-level signals, making it suitable for use with effects loops or mixing desks.
User questions about ABY Pro Selector Morley
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect pedal in PDF format for free! Find your manual ABY Pro Selector - Morley and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ABY Pro Selector by Morley.