KL1516AIM - Network switch ATEN - Free user manual and instructions
Find the device manual for free KL1516AIM ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | KVM over IP Switch |
| Brand | ATEN |
| Model | KL1516AIM |
| Number of Ports | 16 (RJ-45) |
| Remote Access | IP-based, up to 1280x1024 resolution |
| Power Supply | AC 100-240V, 50-60Hz, 40W max |
| Dimensions (W x D x H) | 48.3 x 44.0 x 4.4 cm (19" 1U rackmount) |
| Weight | Approx. 3.0 kg |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 0-80% RH, non-condensing |
| Key Features | Dual power supply, KVM over IP, virtual media support, multi-user access |
| Maintenance | Clean with a soft dry cloth; avoid liquids |
| Safety | Disconnect power before cleaning; use grounded outlet |
| Spare Parts & Repairability | Internal power supply module; contact ATEN support for parts |
| General Information | Designed for data center and server room management |
Frequently Asked Questions - KL1516AIM ATEN
How do I access the KL1516AIM remotely?
Connect the switch to your network via the Ethernet port. Assign an IP address using the front panel or DHCP. Then, use a web browser or the ATEN KVM Viewer software to log in with the switch's IP.
Can I connect multiple users simultaneously?
Yes, the KL1516AIM supports up to 32 simultaneous connections (16 local and 16 remote) with multi-user access and independent channel control.
What video resolution does it support?
The switch supports resolutions up to 1280x1024 at 60 Hz for both local and remote sessions.
Does it support virtual media?
Yes, the KL1516AIM supports virtual media over IP, allowing you to mount ISO images or USB drives remotely to connected servers.
What cable length is supported?
Using standard Cat5e/6 cables, you can connect servers up to 150 meters from the switch.
How do I reset the switch to factory defaults?
Locate the reset button on the rear panel. Press and hold it for 5 seconds using a paperclip until the power LED blinks. The switch will reboot with default settings.
Is the power supply redundant?
Yes, the KL1516AIM features dual power supplies for redundancy. If one fails, the other continues operation without interruption.
Does it support SNMP?
Yes, the switch supports SNMP v1/v2/v3 for network management and integration with monitoring systems.
Can I update firmware?
Firmware can be updated via the web interface. Download the latest version from the ATEN website and upload it through the maintenance section.
What security features are available?
The KL1516AIM supports SSL/TLS encryption, user authentication with password policies, and IP/MAC address filtering for secure remote access.
User questions about KL1516AIM ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual KL1516AIM - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KL1516AIM by ATEN.