UV Flood 36 - Projecteur UV Adj - Free user manual and instructions
Find the device manual for free UV Flood 36 Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UV Floodlight |
| Brand | ADJ |
| Model | UV Flood 36 |
| Power Consumption | 36W |
| Input Voltage | 100-240V AC, 50/60Hz |
| Light Source | 36W UV LED |
| Wavelength | 365-395nm (UV-A) |
| Beam Angle | 30-60 degrees (approximate) |
| Dimensions (LxWxH) | Approx. 200 x 150 x 100 mm |
| Weight | Approx. 2.5 kg |
| IP Rating | IP20 (indoor use only) |
| Housing Material | Aluminum |
| Cooling System | Convection (no fan) |
| Control Options | On/Off switch; optional DMX via external controller (not included) |
| Primary Function | UV blacklight effect for stages, clubs, and events |
| Safety Features | Do not stare directly at the light; avoid prolonged skin exposure |
| Maintenance | Clean with a soft, damp cloth; avoid solvents |
| Spare Parts Available | LED module and power supply (contact ADJ service) |
| Repairability | Replaceable LED module by qualified technician |
Frequently Asked Questions - UV Flood 36 Adj
What is the wavelength of the UV Flood 36?
The unit emits UV-A light in the 365-395 nm range, ideal for fluorescence and blacklight effects.
Can the UV Flood 36 be used outdoors?
No, it is rated IP20 and intended for indoor use only. Exposure to moisture can damage the fixture.
How do I connect the UV Flood 36 to power?
Connect the included IEC power cable to the fixture and plug into a standard wall outlet (100-240V AC). Ensure the switch is off before connecting.
Does the UV Flood 36 support DMX control?
The fixture can be controlled via DMX using an optional external DMX controller. It requires a DMX512 signal to operate in DMX mode.
What is the beam angle of the UV Flood 36?
The beam angle is approximately 30 to 60 degrees, providing a wide flood of UV light.
Is the UV Flood 36 safe to use?
While UV-A is generally safe, avoid direct eye contact and prolonged exposure to skin. Use appropriate shielding if necessary.
How do I clean the UV Flood 36?
Disconnect power and wipe the housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
What is the expected lifespan of the LED?
The LED is rated for approximately 50,000 hours of use, depending on operating conditions.
How can I replace the LED in the UV Flood 36?
LED replacement should be performed by a qualified technician. Contact ADJ service or an authorized dealer for spare parts.
What is the warranty period for the UV Flood 36?
Standard warranty is 1 year from the date of purchase. Check with your retailer for specific terms.
User questions about UV Flood 36 Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projecteur UV in PDF format for free! Find your manual UV Flood 36 - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UV Flood 36 by Adj.