PLH-982 - Sewing machine JUKI - Free user manual and instructions
Find the device manual for free PLH-982 JUKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Lockstitch Sewing Machine |
| Brand | Juki |
| Model | PLH-982 |
| Dimensions (W x D x H) | 650 mm x 320 mm x 750 mm |
| Weight | 40 kg |
| Power Supply | 220-240 V, 50/60 Hz, single phase |
| Motor Power | 550 W clutch motor or 400 W servo motor |
| Max Sewing Speed | 5,000 stitches per minute |
| Stitch Length | Up to 5 mm (adjustable) |
| Needle System | Standard industrial (e.g., DBx1, DPx5) |
| Needle Bar Stroke | 35 mm |
| Presser Foot Lift | Manual: 6 mm, Knee: 13 mm |
| Thread Trimmer | Automatic thread trimmer included |
| Back Tack Function | Automatic back tack at start/end |
| Lubrication | Automatic oiling system with large oil pan |
| Maintenance | Daily: clean hook area, oil hook; weekly: clean bobbin case |
| Safety Features | Finger guard, safety clutch mechanism |
| Replaceable Parts | Needle plate, feed dog, presser foot, bobbin case, motor drive belt |
| Repairability | Modular design; spare parts widely available from Juki distributors |
| Documentation | User manual available for free download in PDF format |
Frequently Asked Questions - PLH-982 JUKI
How do I thread the Juki PLH-982 sewing machine?
Thread the machine according to the numbered threading path on the machine head: start from the spool pin, pass through the upper tension discs, take-up lever, needle bar thread guide, and needle eye. Ensure the thread is properly seated in the tension discs.
What type of needle and thread should I use?
Use industrial needles system DBx1 or DPx5 (size 11-18 for medium fabrics). For threads, use bonded nylon or polyester thread size 20-60. Always match needle size to thread thickness.
How do I adjust the stitch length?
Turn the stitch length dial located on the side of the machine. The dial is marked in millimeters (1 to 5). Decreasing the number shortens the stitch, increasing lengthens it.
Why is the machine skipping stitches?
Common causes: incorrect needle (bent, dull, or wrong size), improper threading, or tension imbalance. Also check needle timing. Replace the needle and re-thread, then test on scrap fabric.
How do I oil the Juki PLH-982?
Use only sewing machine oil (SAE 10). Fill the oil pan to the marked level. The machine has an automatic wick system, but manually oil the hook and needle bar once a week. Wipe excess oil before sewing.
What is the maximum sewing speed?
The PLH-982 can sew up to 5,000 stitches per minute (spm) with a properly adjusted motor. Use servo motor for precise speed control, especially at low speeds.
How do I set the tension?
For general sewing, set upper tension to 3-4 (middle of the dial) and bobbin tension to a thread drop test: hold the bobbin case by the thread and gently jerk; it should drop slightly. Adjust with the screw on the bobbin case.
Why does the thread keep breaking?
Check for burrs on the needle plate, hook, or tension discs. Also ensure the thread path is not snagged and the tension is not too high. Use a new needle and high-quality thread.
How do I replace the needle?
Loosen the needle clamp screw with a screwdriver. Remove the old needle and insert the new needle with the flat side facing the back of the machine. Tighten the screw securely.
Where can I find spare parts for the PLH-982?
Spare parts are available from authorized Juki dealers and online sewing parts stores. Common parts: needle plate (part #), feed dog, presser foot, and bobbin case. Use the model number for correct fitment.
User questions about PLH-982 JUKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual PLH-982 - JUKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLH-982 by JUKI.