Mega Flat Pak 8 Plus - Machine à effets American DJ - Free user manual and instructions
Find the device manual for free Mega Flat Pak 8 Plus American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Effect Light |
| Brand | American DJ |
| Model | Mega Flat Pak 8 Plus |
| Dimensions (L x W x H) | 10.5 x 10.5 x 4.5 inches |
| Weight | 5.5 lbs |
| Power Consumption | 100W max |
| Power Supply | AC 100-240V, 50/60Hz |
| Light Source | 8 x 3W RGB LEDs |
| Control Modes | DMX-512, Master/Slave, Sound Active, Auto |
| DMX Channels | 3, 6, or 9 selectable |
| Beam Angle | 25 degrees |
| Operating Modes | Standalone, DMX, Master/Slave |
| Housing Material | Aluminum and plastic |
| Cooling System | Passive convection |
| Mounting Options | Floor standing, truss mount |
| Safety Features | Safety cable loop, overheat protection |
| Care and Cleaning | Wipe with dry cloth; avoid solvents |
| Spare Parts | LED modules, power supply, control board |
| Repairability | Modular design, user-replaceable LEDs |
| Included Accessories | Power cord, mounting brackets, manual |
Frequently Asked Questions - Mega Flat Pak 8 Plus American DJ
How do I connect the Mega Flat Pak 8 Plus to a DMX controller?
Use a 3-pin XLR cable to connect the DMX input of the fixture to the controller's output. Set the fixture's DMX address using the DIP switches or menu. Ensure proper termination on the last fixture.
What are the available DMX channel modes?
The fixture supports 3, 6, and 9 channel modes. In 3-channel mode, you control red, green, blue. 6-channel adds dimmer, strobe, and color macros. 9-channel provides individual control of each LED plus master dimmer and strobe.
How do I set the fixture to sound-active mode?
Press the Mode button until 'Sou' (Sound) appears on the display. The fixture will respond to music via the built-in microphone. You can adjust sensitivity with the Up/Down buttons.
Can I use this fixture as a standalone unit?
Yes, the Mega Flat Pak 8 Plus can operate standalone in Auto or Sound Active modes. It will cycle through built-in programs or react to music without a controller.
What is the recommended mounting method for this light?
The fixture can be placed on the floor or mounted on a truss. Use the included mounting brackets and always secure with a safety cable. Ensure the surface is stable and the fixture is not tilted beyond 45 degrees.
How do I clean the unit?
Disconnect power and let the fixture cool. Use a soft, dry cloth to wipe the housing and lenses. Do not use abrasive cleaners or solvents. Clean the fan vents regularly to prevent overheating.
What does the 'Slave' mode do?
Slave mode allows multiple fixtures to sync together. Connect the master fixture's DMX output to the slave's input, set the slave to 'Slave' mode. The slave will copy the master's behavior.
Why are my LEDs flickering?
Flickering can be caused by a loose DMX cable, incorrect DMX addressing, or a power issue. Check connections, ensure the DMX terminator is used at the end of the chain, and verify the power supply is stable.
How long do the LEDs last?
The rated LED lifespan is approximately 50,000 hours. This can vary based on usage conditions such as ambient temperature and ventilation.
Can I replace a faulty LED myself?
Yes, the LED modules are user-replaceable. Unscrew the cover, disconnect the faulty module, and install a new one. Ensure power is off and the unit is cool. Spare parts are available from American DJ.
User questions about Mega Flat Pak 8 Plus American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Machine à effets in PDF format for free! Find your manual Mega Flat Pak 8 Plus - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mega Flat Pak 8 Plus by American DJ.