Pacific R1 Plus - Uncategorized THERMALTAKE - Free user manual and instructions

Product Type	CPU Water Block
Brand	Thermaltake
Model	Pacific R1 Plus
Compatibility	Intel LGA 1200/115x/2066, AMD AM4/AM3+/FM2+
Base Material	Copper (nickel-plated)
Top Material	Acrylic
Dimensions (L x W x H)	70 x 70 x 30 mm
Weight	200 g
Lighting	Addressable RGB (5V 3-pin)
Ports	2x G1/4" threads
Max Flow Rate	500 L/h (estimated)
Max Operating Temperature	60°C
Cooling Capacity	Up to 350W TDP (estimated)
Installation	Tool-free mounting bracket included
Maintenance	Clean with distilled water; avoid abrasive cleaners
Accessories	Mounting kit, thermal paste, RGB controller cable
Warranty	2 years (typical)

Frequently Asked Questions - Pacific R1 Plus THERMALTAKE

What CPUs is the Pacific R1 Plus compatible with?

The Pacific R1 Plus supports Intel LGA 1200, 115x, and 2066 sockets, as well as AMD AM4, AM3+, and FM2+ sockets. Always verify the latest compatibility list on the Thermaltake website.

Does the Pacific R1 Plus include a pump?

No, the Pacific R1 Plus is a passive CPU water block. It requires a separate pump in your custom loop.

How do I control the RGB lighting?

The RGB lighting is controlled via a 5V 3-pin addressable RGB header on your motherboard or an optional RGB controller. Use compatible software like ASUS Aura, Gigabyte RGB Fusion, etc.

What type of coolant should I use?

Use distilled water or a non-conductive coolant specifically designed for PC water cooling. Do not use tap water or automotive coolants.

How do I install the water block correctly?

Apply a small amount of thermal paste, secure the block with the included mounting bracket and backplate, and tighten screws in a diagonal pattern. Follow the manual for torque recommendations.

Can I use the Pacific R1 Plus with soft tubing?

Yes, the G1/4' ports are compatible with standard 1/4' fittings for both soft and hard tubing.

What is the maximum temperature the block can withstand?

The acrylic top is rated up to 60°C. Exceeding this may cause damage.

How do I clean the water block?

Disassemble the block using the included Allen key, gently clean the copper base and acrylic top with distilled water and a soft cloth. Avoid alcohol or harsh chemicals.

Does the Pacific R1 Plus require a backplate?

Yes, a backplate is included for added stability and to prevent motherboard bending. It is required for proper installation.

What is the warranty period?

Thermaltake typically offers a 2-year warranty for the Pacific R1 Plus. Check your purchase documentation for exact terms.

USER MANUAL Pacific R1 Plus THERMALTAKE

Note	Command (Chinese)	Command (English)	Description
light Mode	流動	Flow Flow mode cannot change color
	光譜循環	RGB Spectrum RGB Spectrum mode cannot change color
	雷達	Radar Radar/ripple mode
	閃爍	Blink Blink mode
	呼吸	Pulse Pulse mode
	波浪	Wave Wave mode
	全亮	Static Static/full lighted mode
Color Mode	紅色	Red Color Change all LED color “Red”
	橙色	Orange Color Change all LED color “Orange”
	黃色	Yellow Color Change all LED color “Yellow”
	綠色	Green Color Change all LED color “Green”
	藍色	Blue Color Change all LED color “Blue”
	靛色	Indigo Color Change all LED color “Indigo”
	紫色	Purple Color Change all LED color “Purple”
	白色	White Color Change all LED color “White”
	彩色	Rainbow Default color
Light Speed	速度極快	Extreme Light speed “Extreme”
	速度快	Fast	Light speed “Fast”
	速度慢	Normal Light speed “Normal”
	速度極慢	Slow	Light speed “Slow”
	快一點 or 快	Quickly Change the light speed to "quickly"
	慢一點 or 慢	Slowly	Change the light speed to "slowly"
Switch	關燈	Turn Off	Turn off all LED light
	開燈	Turn On	Turn on all LED light
	結束	End	Leave voice control
Brightness	最亮	Glaring	Brightness 100%
	亮	Bright	Brightness 75%
	暗	Dim	Brightness 50%
	最暗	Dark	Brightness 25%
Fan Speed	效率	Performance	Fan Speed Mode "Performance"
	靜音	Silent	Fan Speed Mode "Silent"
Special Command
Hello Command	Hello TT	Hello TT
	Hello Intel	Hello Intel
	Hello AMD	Hello AMD
	Hello Nvidia	Hello Nvidia
	Hello ROG	Hello ROG
	Hello Gigabyte	Hello Gigabyte
	Hello MSI	Hello MSI
	TT No.1	TT No.1

Basic Command			Color command
Wake up Alexa	Command Light Mode Color
Alexa,tell/ask/openThermaltake	use/switch/change	Radar Mode	in Red colorin Orange colorin Yellow colorin Green colorin Blue colorin Indigo colorin Purple colorin White colorin Rainbow color
		Pulse Mode
		Blink Mode
		Static Mode
		Cross Mode
		Shooting Star Mode
		Black Hole Mode
		Twinkle Mode
		Raindrop Mode
		Heartbeat Mode
		Stack Mode
		Scan Mode
		Swirl Mode
		Aurora Mode	Preset modes with no color options.
		Flow Mode
		RGB Spectrum Mode
		Wave Mode
		Temperature Mode
		Hello TT Mode
		Goodbye TT Mode
		HelloAMD/Intel/Nvidia/ROG/Gigabyte/MSI Mode
		On/Off Light

* Please note that the names of five light modes were changed, and Alexa will only recognize the new names.
1. Ripple to Radar
2. Full Lighted to Static
3. Thermal to Temperature
4. Firefly to Raindrop
5. Roundabout to Scan

EX:

Alexa, tell Thermaltake (Alexa: Hi I am Thermaltake say command) use Flow mode.

Alexa, ask Thermaltake (Alexa: Hi I am Thermaltake say command) Pure Plus switch Radar mode in green color.

Alexa, open Thermaltake (Alexa: Hi I am Thermaltake say command) what is the weather in Taipei.

Alexa, ask Thermaltake (Alexa: Hi I am Thermaltake say command) use Hello TT mode.

Alexa, ask Thermaltake (Alexa: Hi I am Thermaltake say command) use Goodbye TT mode. (Turn off light)

Alexa, ask Thermaltake (Alexa: Hi I am Thermaltake say command) turn off light.