IE8221-F - Surveillance Camera Vivotek - Free user manual and instructions
Find the device manual for free IE8221-F Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Vivotek |
| Model | IE8221-F |
| Category | IP Camera |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 2 Megapixel (1920x1080) |
| Lens | Fixed focal, 2.8mm / 3.6mm optional |
| IR Range | Up to 30 meters |
| Day/Night | True Day/Night with IR cut filter |
| Compression | H.265 / H.264 / MJPEG |
| Power | PoE (802.3af) or DC 12V |
| Dimensions (Ø x L) | 70mm x 186mm |
| Weight | 450g |
| Enclosure Rating | IP67 (weatherproof) |
| Operating Temperature | -40°C to 60°C |
| Storage | MicroSD/SDHC/SDXC (up to 256GB) |
| Network Interface | 10/100 Base-T Ethernet |
| Supported Protocols | IPv6, IPv4, TCP/IP, HTTP, HTTPS, FTP, SMTP |
| Security Features | Password protection, HTTPS encryption, IP filter |
| Maintenance | Clean lens with dry cloth; check cable connections |
| Spare Parts | Power adapter (optional), mounting bracket (optional) |
| Repairability | Professional repair required; no user serviceable parts |
Frequently Asked Questions - IE8221-F Vivotek
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with default settings.
How to access the camera via web browser?
Open a web browser and enter the camera's IP address. Use default credentials (admin/admin) to log in. Install the required plugin if prompted.
What is the default IP address?
The default IP address is 192.168.0.100. You can use the Vivotek Installation Wizard or search tool to find it on your network.
How to enable PoE?
PoE is automatically enabled when connected to a PoE switch or injector. The camera supports IEEE 802.3af. No manual configuration is required.
How to install the camera outdoors?
Mount the camera using the provided bracket. Ensure all cable connections are sealed with weatherproof tape. The camera is rated IP67 for outdoor use.
How to configure motion detection?
Go to the camera's web interface under 'Event' -> 'Motion Detection'. Draw a detection zone and set sensitivity. Assign an action such as email alert or recording.
How to record to an SD card?
Insert a microSD card into the slot. Access the camera's web interface, go to 'Storage' -> 'SD Card', and enable recording. Set schedule or trigger-based recording.
The camera is not powering on.
Check the Ethernet cable connection for PoE. If using DC power, verify the power adapter is connected and supplying 12V. The LED should light up green.
How to update the firmware?
Download the latest firmware from Vivotek's website. Go to 'System' -> 'Firmware Upgrade' in the web interface, upload the file, and wait for the camera to reboot.
What is the warranty period?
Vivotek provides a 2-year warranty for the IE8221-F. Extended warranties may be available through your reseller.
User questions about IE8221-F Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual IE8221-F - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IE8221-F by Vivotek.