ST853 - Range hood Caple - Free user manual and instructions
Find the device manual for free ST853 Caple in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Caple |
| Model | ST853 |
| Width | 90 cm (35.4 inches) |
| Depth | 50 cm (19.7 inches) |
| Height (without chimney) | 12 cm (4.7 inches) |
| Net Weight | 18 kg (39.7 lbs) |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Max Extraction Rate | 780 m³/h (manufacturer data) |
| Number of Speeds | 3 + intensive mode |
| Noise Level (max speed) | 56 dB(A) |
| Lighting Power | 2 x 2.5 W LED |
| Grease Filter Type | Aluminum mesh, dishwasher safe |
| Carbon Filter Optional | Yes (for recirculation mode) |
| Control Type | Touch control panel |
| Functions | Suction, recirculation, timer, filter saturation indicator |
| Maintenance | Clean grease filter monthly; wipe surfaces with damp cloth |
| Safety Features | Overheat protection, auto shut-off after 4 hours |
| Spare Parts Available | Grease filters, LED lamps, carbon filter, control board |
| Energy Class | A+ (estimated) |
| Installation Type | Wall-mounted or island (adaptable) |
| Warranty | 2 years (subject to registration) |
Frequently Asked Questions - ST853 Caple
How to install the Caple ST853 range hood?
Ensure the installation height is between 65-75 cm from hob to hood. Mount the chimney and secure the hood to the wall using provided fixings. Connect to 220-240V outlet. For recirculation mode, install carbon filters.
How do I clean the grease filters?
Remove the aluminum grease filters and wash them in warm soapy water or in adishwasher (max 65°C). Allow to dry completely before reinserting. Clean every 1-2 months.
How to replace the carbon filter?
Only used in recirculation mode. Remove the grease filters, then slide out the old carbon filter. Insert a new one (model CFR5). Replace every 3-6 months depending on usage.
How to change the LED lamps?
Switch off power. Gently pry out the LED module using a flat tool. Disconnect the wire and replace with a2.5W LED (type GU10 or similar). Ensure correct polarity.
What is the noise level of the ST853?
The noise level varies by speed: 43 dB(A) at low speed, 50 dB(A) at medium, 56 dB(A) at high (max). Theintensive mode may reach 62 dB(A).
Does the hood have a timer function?
Yes, thetimer allows you to set the hood to automatically turn off after 10 or 15 minutes. Activate by holding the 'minus' button for 3 seconds.
What are the dimensions of the ST853?
The hood width is90 cm, depth 50 cm, and height without chimney 12 cm. The telescopic chimney extends up to 70 cm. Ensure clearance above the hob.
Can the hood be used in recirculation mode?
Yes, if ducting is not possible. Install optionalcarbon filters (model CFR5) to absorb odors. The hood comes with a recirculation kit for top exit.
How to reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the '+' button for 3 seconds until the indicator light turns off. Repeat for grease and carbon filters separately.
What is the energy efficiency class?
The Caple ST853 is ratedenergy class A+ on the EU scale, thanks to efficient motors and LED lighting. Actual consumption depends on usage.
User questions about ST853 Caple
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ST853 - Caple and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST853 by Caple.