62113 I WF - Dishwasher Arçelik - Free user manual and instructions
Find the device manual for free 62113 I WF Arçelik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Number of Place Settings | 13 |
| Energy Efficiency Class | A++ |
| Drying Efficiency Class | A |
| Washing Efficiency Class | A |
| Annual Energy Consumption (kWh) | 266 |
| Annual Water Consumption (L) | 2800 |
| Noise Level (dB) | 44 |
| Height (mm) | 815 |
| Width (mm) | 598 |
| Depth (mm) | 550 |
| Weight (kg) | 35 |
| Power Supply (V/Hz) | 220-240 / 50 |
| Current (A) | 10 |
| Number of Programs | 6 |
| Programs | Eco, Auto, Intensive, Quick, Glass Care, Pre-Rinse |
| Additional Features | Delay Start, Half Load, Extra Drying, Self-Clean |
| Salt and Rinse Aid Indicators | Yes |
| Filter Type | Self-Cleaning Microfilter |
| Water Connection | Cold / Hot Water (max 60°C) |
| Safety Features | AquaStop, Child Lock, Overflow Protection |
Frequently Asked Questions - 62113 I WF Arçelik
How do I install the dishwasher?
Ensure the installation area is level and has a power outlet and water connection. Connect the inlet hose to a cold water supply (max 60°C) or hot water if available. The drain hose must be connected to a siphon or sink drain. Secure the dishwasher with the provided brackets to prevent tipping.
What do the error codes mean?
Common error codes: E01 – water inlet problem, E02 – drain problem, E03 – heating error, E04 – overfill, E05 – temperature sensor fault. Consult the user manual for specific codes and troubleshooting steps.
How often should I clean the filter?
Clean the filter every 1-2 weeks or when the filter indicator lights up. Remove the bottom basket, turn the filter counterclockwise, rinse under running water, and reassemble. A clogged filter reduces washing performance.
Can I use regular dish soap?
No, use only dishwasher-specific detergent (powder, gel, or tabs) and rinse aid. Regular dish soap causes excessive suds and may damage the appliance.
Why is there water left at the bottom?
Check if the drain hose is kinked or blocked. Clean the filter and ensure the sink drain is not clogged. If the problem persists, run a drainage program or contact service.
How do I adjust the water hardness setting?
Refer to the user manual to set the water hardness level based on your local supply. Use the test strip provided or contact your water utility. The setting affects salt consumption.
What is the ideal temperature for each program?
Eco: 50°C, Auto: 45-65°C, Intensive: 70°C, Quick: 45°C, Glass Care: 40°C, Pre-Rinse: cold. Refer to the program table in the manual for exact durations and temperatures.
Can I open the door during operation?
Opening the door during a cycle will stop the program and may cause water leakage. Only open when the appliance is not running or use the 'paused' function if available. Wait for the steam to dissipate.
How do I activate the Child Lock?
Press and hold the 'Start' button for 3 seconds until the child lock indicator lights up. To deactivate, repeat the process. This prevents accidental program changes.
What is the warranty period?
Arçelik offers a standard 2-year warranty for this dishwasher. Extended warranty may be available upon purchase. Keep your receipt and registration details for service claims.
User questions about 62113 I WF Arçelik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual 62113 I WF - Arçelik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 62113 I WF by Arçelik.