CCL-6-516 - Compressor Ilsco - Free user manual and instructions
Find the device manual for free CCL-6-516 Ilsco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Ilsco |
| Model | CCL-6-516 |
| Category | Compressor |
| Power Source | Electric 120V, 60Hz, 15A |
| Horsepower | 1.5 HP |
| Tank Capacity | 6 Gallons |
| Max Pressure | 150 PSI |
| Air Delivery | 5.0 CFM @ 90 PSI |
| Dimensions (L x W x H) | 20 x 12 x 16 inches |
| Weight | 45 lbs |
| Noise Level | 78 dB |
| Oil Type | SAE 30 non-detergent |
| Duty Cycle | 50% |
| Safety Features | Thermal overload protection, pressure relief valve, safety shutoff |
| Maintenance | Drain tank daily; check oil level before use; clean air filter monthly |
| Accessories Included | Air hose (10 ft), tire inflator, blow gun, couplers |
| Warranty | 1 year limited warranty |
| Color | Blue and black |
| Material | Steel tank, cast iron pump, aluminum heat sink |
| Application | Inflation, stapling, nailing, cleaning, painting |
| Included Items | Compressor unit, user manual, quick start guide |
Frequently Asked Questions - CCL-6-516 Ilsco
What type of oil should I use in the Ilsco CCL-6-516 compressor?
Use SAE 30 non-detergent oil. Do not use multi-viscosity or detergent oils as they can cause excessive wear.
How often should I drain the tank?
Drain the tank after each use or daily to prevent moisture buildup and corrosion. Open the drain valve at the bottom of the tank.
What is the maximum pressure setting?
The maximum pressure is 150 PSI. Do not exceed this limit to avoid damage or injury.
Can I use the compressor for painting?
Yes, the compressor can be used for painting with the appropriate spray gun and settings. Ensure the air delivery (5.0 CFM @ 90 PSI) meets the tool's requirements.
How do I adjust the pressure regulator?
Turn the regulator knob clockwise to increase pressure and counterclockwise to decrease. Monitor the output gauge to set the desired pressure for your tool.
Why does the compressor shut off unexpectedly?
The compressor may shut off due to thermal overload protection. Let it cool down for 15-30 minutes before restarting. Check for adequate ventilation.
What is the recommended maintenance schedule?
Daily: drain tank, check oil level. Monthly: clean or replace air filter. Every 3 months: check safety valve, inspect hoses. Annually: change oil and replace belts if equipped.
Can I use an extension cord with the compressor?
Yes, but use a heavy-duty cord with a minimum 12 AWG gauge and no longer than 50 feet. Ensure the cord is rated for 15A.
What is the duty cycle of this compressor?
The duty cycle is 50%, meaning the compressor can run for 30 minutes in a 1-hour period. Allow it to rest for the remaining time.
How do I reset the thermal overload protector?
If the compressor shuts off due to thermal overload, unplug it and let it cool. The protector will automatically reset once cool. If it does not, press the reset button if available.
User questions about CCL-6-516 Ilsco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual CCL-6-516 - Ilsco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CCL-6-516 by Ilsco.