T 7380 E BS - Water heater Arçelik - Free user manual and instructions

Product Type	Electric Water Heater
Brand	Arçelik
Model	T 7380 E BS
Capacity	80 liters
Power Consumption	2000 W
Voltage	230 V ~ 50 Hz
Dimensions (H x W x D)	100 cm x 45 cm x 45 cm
Weight	25 kg
Energy Efficiency Class	C
Standby Loss	1.2 kWh/24h
Max Water Temperature	75 °C
Thermostat Type	Adjustable
Safety Features	Overheat protection, pressure relief valve, thermal cut-off
Installation Type	Vertical wall-mounted
Heating Element	Copper-sheathed, 2000 W
Material	Enameled steel tank
Insulation	Polyurethane foam
Connection Type	1/2" BSP inlet and outlet
Maintenance	Annual anode rod check, descaling as needed
Warranty	2 years (tank), 5 years (parts)

Frequently Asked Questions - T 7380 E BS Arçelik

What is the capacity of the Arçelik T 7380 E BS water heater?

The capacity is 80 liters, suitable for a small family.

How do I install the water heater?

Installation should be done by a qualified professional. Ensure it is mounted vertically on a solid wall with adequate clearance. Connect to mains water supply and electrical outlet following local codes.

What temperature should I set the thermostat to?

For optimal energy savings and safety, set the thermostat between 55°C and 60°C. Higher temperatures increase energy consumption and risk of scalding.

How do I clean or descale the water heater?

Descaling is recommended every 6-12 months depending on water hardness. Use a descaling agent suitable for water heaters, following the manufacturer's instructions. Alternatively, flush the tank to remove sediment.

What should I do if the water heater is not heating?

Check if the power supply is on and the circuit breaker has not tripped. Verify the thermostat setting. If the problem persists, the heating element or thermostat may need replacement.

How often should I replace the anode rod?

The anode rod should be inspected annually and replaced every 2-5 years to prevent tank corrosion.

Is the water heater safe to use in a bathroom?

Yes, but ensure it is installed in a location not subject to water spray. The unit has IP24 splash-proof protection. Do not install directly above a bathtub or shower.

What is the energy efficiency class of this model?

The Arçelik T 7380 E BS has an energy efficiency class of C under EU regulations. While not the highest, it provides adequate performance for typical use.

Can I use the water heater with solar pre-heating?

Yes, it can be connected to a solar thermal system. Ensure the inlet water temperature does not exceed 70°C to avoid damage.

Where can I find spare parts for this water heater?

Spare parts such as heating elements, thermostats, and anode rods are available from Arçelik authorized service centers or online retailers.

USER MANUAL T 7380 E BS Arçelik

European Union flag with twelve yellow stars arranged in a circle on a blue background (no text or symbols)

ENERG

енергия · ενεργεια

T 7380 E BSArçelik

A+

A

B

C

D

E

F

15 dB

1374

kWh/annum

0

GJ/annum

2017

812/2013