T 7365 B - Water heater Arçelik - Free user manual and instructions

Product Type	Electric Water Heater
Model	T 7365 B
Brand	Arçelik
Capacity	30 liters
Power Rating	2000 W
Dimensions (H x W x D)	450 x 450 x 600 mm
Weight	15 kg
Voltage	220-240 V / 50 Hz
Temperature Range	30°C - 75°C
Energy Efficiency Class	C
Tank Material	Enameled steel
Heating Element	Copper
Safety Features	Overheat protection, pressure relief valve, thermostat
Installation	Wall-mounted
Control Type	Mechanical dial
Insulation	Polyurethane foam
Water Connection	G 1/2 inch
Max Operating Pressure	8 bar
Color	White
Included Accessories	Safety valve, mounting kit
Maintenance	Annual descaling recommended
Certifications	CE, RoHS

Frequently Asked Questions - T 7365 B Arçelik

How do I adjust the water temperature?

Turn the thermostat dial on the front panel clockwise to increase temperature or counterclockwise to decrease. Wait a few minutes for the water to reach the new setting.

What is the recommended installation height?

Install the water heater at a height of at least 1.8 meters from the floor for optimal water pressure and easy access.

How long is the warranty period?

Arçelik offers a 2-year warranty on the T 7365 B water heater for manufacturing defects. Register your product online to activate warranty.

How do I drain the tank for maintenance?

Turn off the power and water supply. Attach a hose to the drain valve at the bottom, open it, and let water flow out. Then close the valve and restore supply.

What does the pressure relief valve do?

It automatically releases excess pressure to prevent tank rupture. If water drips, it may indicate a faulty valve or high pressure—contact a technician.

How to clean the heating element?

Disconnect power, drain the tank, remove the element cover, and use a descaling solution or vinegar to remove limescale. Rinse and reinstall.

Can I use this heater with a solar water system?

This model is designed for direct electric heating only. It is not compatible with solar pre-heating systems without additional controls.

Why is my water not getting hot?

Check if the thermostat is set correctly and the power supply is on. If the safety cut-out tripped, press the reset button on the thermostat.

How to reset the safety cut-out?

Locate the reset button on the thermostat (under the front cover). Press it firmly until it clicks. If it trips again, call a technician.

Is the water heater energy efficient?

It has an energy efficiency class C, which is standard for conventional electric heaters. For better efficiency, set temperature to 55°C and insulate pipes.

USER MANUAL T 7365 B Arçelik

European Union flag with twelve yellow stars arranged in a circle on a blue background (no text or symbols)

ENERG

енергия · ενεργεια

T 7365 BArçelik

A+

A

B

C

D

E

F

15 dB

1375

kWh/annum

0

GJ/annum

2017

812/2013