ARC10A - Heating DIMPLEX - Free user manual and instructions
Find the device manual for free ARC10A DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Oil-filled Radiator |
| Model | ARC10A |
| Brand | Dimplex |
| Heating Power | 1000 W |
| Number of Heat Settings | 2 (Low, High) |
| Thermostat Control | Adjustable |
| Dimensions (H x W x D) | 640 x 490 x 160 mm |
| Weight | 10 kg |
| Power Supply | 230 V ~ 50 Hz |
| Safety Features | Overheat protection, Tip-over switch |
| Maintenance | Wipe with a damp cloth; do not use abrasive cleaners |
| Spare Parts Availability | Contact Dimplex customer service |
| Repairability | Repairs should be carried out by qualified personnel |
| Usage | Indoor use only |
Frequently Asked Questions - ARC10A DIMPLEX
How do I adjust the thermostat?
Turn the thermostat dial clockwise to increase the temperature and counterclockwise to decrease. The heater will automatically cycle on and off to maintain the set temperature.
What are the heat settings?
The ARC10A has two heat settings: Low (approx. 500W) and High (1000W). Select the desired setting using the switch on the control panel.
Is the heater safe to leave unattended?
The heater includes overheat protection and a tip-over switch that automatically turns it off if it falls over. However, it is recommended to turn it off when leaving the room for extended periods.
How do I clean the heater?
Unplug the heater and allow it to cool completely. Wipe the exterior with a soft damp cloth. Do not use abrasive cleaners or immerse in water. Ensure the air vents are free of dust.
Can I use an extension cord?
It is not recommended to use an extension cord. If necessary, use a heavy-duty cord rated for at least 1500W with a plug that matches the heater's. Ensure the cord is fully extended to avoid overheating.
What is the maximum room size?
The heater is suitable for rooms up to approximately 20 square meters (215 square feet) depending on insulation and ambient temperature.
Does it have a timer?
No, the ARC10A does not have a built-in timer. It relies on the thermostat to maintain temperature. An external timer can be used if rated for the heater's power.
Why is the heater not heating?
Check that the thermostat is set above room temperature and the heat setting is on. Ensure the heater is plugged in and the circuit breaker is not tripped. If still not working, contact Dimplex support.
Can I use it in a bathroom?
This heater is not designed for bathroom use unless it is installed in a location where it cannot be splashed and is protected from moisture. Dimplex recommends using a heater specifically rated for bathrooms.
How do I store it in summer?
After the heating season, clean the heater and store it in a dry, dust-free place. Coil the power cord loosely and avoid placing heavy objects on top of it. Ensure the heater is completely cool before storing.
User questions about ARC10A DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual ARC10A - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARC10A by DIMPLEX.